Sitol Acryl 5

Sitol Acryl 5 on Torggler.com
print

PRODUCT TYPE

Acrylic polymer based sealant, plasto-elastic, for sealing joints, cracks and crevices characterized by relatively low maximum deformation. Overpaintable, available in white and grey.

 

CLASSIFICATION ACCORDING TO REGULATION

Classified F in compliance with UNI EN 15651 – 1

 

APPLICATIONS

Plasto-elastic sealing of different types of joints, cracks and fissures, provided that they are characterized by limited maximum 5% deformations from use.

 

TYPE OF SUBSTRATE

Mineral or porous substrates in general such as concrete, plaster, aerated concrete, wood etc.

 

WARNINGS

Not suitable for structural bonding. Does not adhere to Teflon, polyethylene, polypropylene. Sensitive to rain and frost when fresh; once hardened tends to re-emulsify during stagnation and/or prolonged contact with water.

 

N.B.

In any case, for correct use of the material it is essential to follow the instructions on the technical data sheet carefully.

Technical Specifications: 
Skin-over time
approx. 50 minutes
Application temperature
from +5 °C to +40 °C
Cure through rate
10 mm after approx. 10 day
Ultimate elongation (S3 shaped samples)
500%
Breaking load (S3 shaped samples)
0,67 N/mm²
Elastic modulus (S3 shaped samples)
0,95 N/mm²
Ultimate elongation (specimens)
150%
Breaking load (specimens)
0,10 N/mm²
Elastic modulus (specimens)
0,16 N/mm²
Maximum operating elongation
5%
Operating temperature
from –25 °C to +85 °C
Dimension of sealants
6-30 mm
Consumption
approx. 3 linear meters of joint of 1 cm covered with one 310-ml cartridge
Storage
24 months
Packaging
310 ml
Product Variants: 
Product PropertyProduct CodeProduct Barcode
white 310 ml
5130
8030334051302
gray 310 ml
5131
8030334051319
Area of Application: 
Files: 

Sitol Acryl 5