Antol Cls System Monorasante

Antol Cls System Monorasante on Torggler.com
print

PRODUCT TYPE

Premixed, polymer modified, fibre-reinforced cement mortar for the smoothing of concrete and reinforced concrete.

 

CLASSIFICATION ACCORDING TO REGULATION

R1 PCC according to UNI EN 1504-3.

 

APPLICATIONS

Smoothing and finishing of cast concrete even on a large scale, repairs with cement mortars such as ACS Restauro, ACS Strutturale, ACS Colabile or general surface finish of cementitious substrates with good mechanical strength.

 

TYPE OF SUBSTRATE

Mineral substrates in concrete or high-mechanical-strength cementitious cement mortars.

 

MATERIALS TO APPLY SUBSEQUENTLY

Protective acrylic paints for concrete such as ACS Pittura.

 

WARNINGS

Do not mix with other binders and do not use the product when it has already started to set and/or at temperatures below +5°C. To avoid the formation of cracks due to rapid evaporation of mixing water in the hot season, smoothing performed with ACS MONORASANTE must be protected from the wind and direct sunlight.

 

N.B.

In any case, for correct use of the material it is essential to follow the instructions on the technical data sheet carefully.

Technical Specifications: 
Mixing water
approx. 20%
Mix pot life
approx. 60 minutes
Setting time (start/finish)
approx. 9/12 hours
Application temperature
+5 °C to +30 °C
Compression strength
40 MPa
Bending strength
10 MPa
Elastic modulus
14 GPA
Adherence bonding
2,8 MPa
Fire reaction
Classe A1
Operating temperature
–20 °C to +90 °C
Attainable thickness
1-3 mm
Consumption
1,7 kg/m² per mm of thickness
Storage
12 months
Packaging
25 kg

 

Product Variants: 
Product PropertyProduct CodeProduct Barcode
25 kg
6301
8030334063015
Files: 

Antol Cls System Monorasante