ANTOL UMAFLOW

ANTOL UMAFLOW on Torggler.com
print

PRODUCT TYPE
One-component, high strength pre-mixed liquid mortar, with fast setting and hardening, for installing manhole covers, localised repairs of industrial floors and repair of concrete

 

CLASSIFICATION ACCORDING TO REGULATION 
R4 CC according to UNI EN 1504-3.

 

FIELDS OF APPLICATION 
Fast installation and fixing of manhole covers and chambers, fixing of street furniture and fast repair of concrete flooring.

 

TYPES OF SUBSTRATE 

Concrete and/or reinforced concrete.
 

IMPORTANT 
Do not mix with other binders and do not use the product when it has already started to set and/or at temperatures below +5°C. To avoid the formation of cracks due to rapid evaporation of mixing water in the hot season, protect from the wind and direct sunlight, and spray the surface with water or cover with polyethylene sheets.

 

NOTE
For the correct use of the material, it is essential that the instructions on the technical data sheet be closely followed.

Technical Specifications: 
Mixing water
approx. 13%
Mix pot life
approx. 30 minutes
Setting time (start/finish)
approx. 40/50
Application temperature
+5 °C to +30 °C
Compression strength
65 MPa
Bending strength
11 MPa
Elastic modulus
28 GPa
Adherence bonding
> 2 MPa
Capillary absorption
< 0,1 kg/(m²*h0,5)
Fire reaction
Classe A1
Operating temperature
–20 °C to +90 °C
Attainable thickness
20-100 mm
Consumption
21 kg/m² per cm of thickness
Storage
9 months
Packaging
25 kg
Product Variants: 
Product PropertyProduct CodeProduct Barcode
grey 25 kg
5080
8030334050800
anthracite 25 kg
5081
8030334050817
Area of Application: 
Files: 

ANTOL UMAFLOW