Umafix

Umafix on Torggler.com
print

PRODUCT TYPE

Premixed, multi-purpose, thixotropic, rapid setting and hardening, high mechanical strength cement mortar.

 

CLASSIFICATION ACCORDING TO REGULATION

R2 CC according to EN 1504-3

 

APPLICATIONS

Rapid repairs, reconstructions and smoothing of beams, columns, crevices, segregation in concrete, formwork spacers, mounting of clamps, hooks and tie rods, blocking of pipes, poles and railings, laying of manhole covers.

 

TYPE OF SUBSTRATE

Mineral substrates such as concrete, screeds and cement mortars.

 

MATERIALS TO APPLY SUBSEQUENTLY

Levelling compounds for concrete such as ACS Monorasante, ACS Rasatura 1K or ACS Pittura.

 

WARNINGS

Do not mix with other binders and do not use the product when it has already started to set and/or at temperatures below +5°C. To avoid the formation of cracks due to rapid evaporation of mixing water in the hot season, repairs and inserts performed with Umafix must be kept wet for at least 24 hours and protected from the wind and direct sunlight.

 

N.B.

In any case, for correct use of the material it is essential to follow the instructions on the technical data sheet carefully.

Technical Specifications: 
Mixing water
approx. 17-18%
Mix pot life
approx. 15 minutes
Setting time (start/finish)
approx. 15/30 minutes
Application temperature
+5 °C to +35 °C
Compression strength
45 MPa
Bending strength
7 MPa
Elastic modulus
18 GPa
Adherence bonding
2 MPa
Capillary absorption
0,36 kg/(m²*h0,5)
Fire reaction
Classe A1
Operating temperature
–20 °C to +90 °C
Attainable thickness
0-40 mm
Consumption
18 kg/m² per cm of thickness
Storage
6 months
Packaging
25 and 5 kg
Product Variants: 
Product PropertyProduct CodeProduct Barcode
5 kg
6045
8030334060458
25 kg
6046
8030334060465
Files: 

Umafix