Tiles and Natural Stone Installation

T 50

Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors. Suitable for single-fired and double-fired ceramic materials and aerated concrete materials. It can also be used as thin-layer masonry mortar.
C1E_EN12004
  • Extended open time
  • For bathrooms and kitchens
  • For indoor and outdoor use

T 50 is a powder cement-based adhesive based on highstrength cements, selected aggregates, synthetic resins and specific additives. Once mixed with water it creates a glue with excellent workability, good thixotropy and high adhesiveness on all types of cement substrates. Applied vertically it does not drip and does not let the tiles slip. It is resistant to frost-thaw cycles. T 50 is classified as class C1E cement-based adhesive according to EN 12004.

  • Bonding to walls and floors, indoors and outdoors, of single-fired and double-fired ceramic tiles and ceramic mosaic on the most varied types of cement-based substrates, provided they are cured and dry: concrete walls, walls made of cement-based plaster or of cementlime mortar, indoor walls made of cellular concrete blocks, cement-based screeds.
  • Laying of aerated concrete elements (gasbeton).
  • Indoor and outdoor bonding of ceramic coverings of swimming pools and tanks, if mixed with Flex (see the relevant technical data sheet).
  • Indoor and outdoor bonding to the wall and floor of porcelain stoneware and glazed stoneware of medium and large size, and of natural stone also of large format, if mixed with Flex (see the relevant technical data sheet).
  • For applications on gypsum or anhydrite surfaces a surface pre-treatment with Tile Primer is required. In case of doubt, contact our Technical Department for this type of application.
Color Code Packaging Packaging size Pallet Barcode
 
White
5442 bag 25 kg 50 bags 8030334054426
 
Grey
5444 bag 25 kg 50 bags 8030334054440