Mounting Elements

Sintered expanded polystyrene panel with graphite additive with excellent mechanical compactness, high thermal insulation and a high density of 140 kg/m³ for use as an insulating underlay, thermal bridge correction, underlay for windows and as a direct, through or press-fit block.

Special screw made of galvanised steel for fixing PVC and wood profiles to concrete, with high-low thread, flat countersunk head, TX30 drive and various lengths from 50 to 300 mm.

Special screw made of galvanised steel for fixing aluminium profiles on concrete, with high-low thread, reduced cylinder head, TX30 drive and various lengths from 50 to 300 mm.

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.

Expansion moulded mounting block in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.

Expansion moulded mounting cylinder in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.

Mounting bracket made of rigid, rot-proof polyurethane foam, with three foam washers. The 20 mm grid on both sides marks the precise cut of the saw, allowing the desired thickness to be used, from 60 to 200 mm. Recommended for hinges and parapets. (incl. 3 screw anchors SXRL).

Hinge mounting element.

Mixer for chemical anchors.