Anchoring and Mounting

Reliability, innovation and responsibility are the hallmarks of Torggler products. These three values are also reflected in our anchoring and fixing systems combined with long-term performance. Our products cover a wide range of applications, from the simplest and most practical to the most technically demanding, in order to meet all specific requirements.

Rocksolid M30

Fibre-reinforced fine cementitious mortar suitable for repairing and reinforcing both reinforced and unreinforced plaster and masonry structures with very high mechanical performance.
GPCSIVWc0_EN998-1 R3CC_EN1504-3 M30_EN998-2

Rocksolid M15

Fibre-reinforced fine cementitious mortar with high mechanical performance suitable for restoration work and structural consolidation of plaster, including reinforced plaster and masonry.
GPCSIVWc0_EN998-1 M15_EN998-2

Rocksolid Lime M15

Fibre-reinforced mortar based on NHL natural hydraulic lime for the repair and structural consolidation of plasters, including reinforced plasters and masonry.
GPCSIVWc0_EN998-1 M15_EN998-2

Xtreme Grip Vinylester

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.
ETA_web Émissions dans l’air intérieur A+ Sisma

CA Poly

Two-component polyester resin-based chemical anchor without styrene for fixing medium-light loads on un-cracked concrete, solid and perforated brick masonry and autoclaved cell concrete.
ETA_web Émissions dans l’air intérieur A+

Epox Ripresa

Two-component epoxy adhesive for concrete casting joints.

Espansol Ancor

Pre-mixed, fluid, self-levelling cementitious mortar for anchoring and precise grouting works.
R4PCC_EN1504-3 EN1504-6

Flash

Extra-fast setting, premixed cementitious mortar for small installation works.
R1CC_EN1504-3

Chemical Anchor Cage

Cage for application of chemical anchors on perforated bricks in combination with threaded rods of different size. Hole diameter 12 mm and hole length 80 mm; hole diameter 15 mm and hole length 85 mm; hole diameter 20 mm and hole length 85 mm.