GP 100

GP 100 is a ready-to-use interior filler, ideal for skimming masonry or plasterboard surfaces; it is suitable for use on walls and ceilings made of gypsum, concrete, plaster or mixed mortar, even when unfinished.

Instructions for use

Preparation for application
Thoroughly clean the surface to be treated, completely removing any traces of dust, grease and efflorescence.

Preparation for application
Thoroughly clean the surface to be treated, completely removing any traces of dust, grease and efflorescence.

Application instructions
Load the trowel with GP 100 and apply it to the surface. For thick layers (over 1.5 mm), it is advisable to build up the surface in several successive applications. Paints and coatings must be applied once the product has dried completely. It is recommended that you reseal the container carefully after partial use and take care not to contaminate any unused product with dried residue or uncleaned tools.

Storage

Store GP 100 in a dry place, away from sources of heat and frost. It will keep for at least 12 months in its unopened original packaging.

Warnings

Do not add any other materials to the ready-mixed product. Do not apply GP 100 at temperatures below +5 °C. Store the product in a dry place, away from sources of heat and frost. Paints and coatings must be applied once the product has dried completely.