Solvente per schiuma poliuretanica
Spray cleaner for fresh polyurethane foam of any kind and sealants of any type.
Spray cleaner for fresh polyurethane foam of any kind and sealants of any type.
Discover more
The Solvente per schiuma poliuretanica consists of a mixture of solvents and polymers, and a propellant based on denatured hydrocarbons, which are odourless and non-toxic. It is a clear liquid capable of rapidly dissolving fresh polyurethane foam. It does not dissolve hardened foam.
To clean the polyurethane foam extrusion gun, screw the cylinder – without forcing it – into the circular threaded socket provided. Press the trigger to expel any foam residue from inside the gun. As soon as you see the solvent coming out, release the trigger and wait 1 or 2 minutes to allow the solvent to dissolve the residue inside the gun. Then, whilst pressing the trigger, discharge the contents into a suitable container until pure solvent emerges. If necessary, repeat the operation 2 or 3 times. Unscrew the cylinder from the gun; the gun is now clean and ready for further use. If the gun is not to be used immediately, close the rear valve. To remove foam from any soiled surfaces, fit the spray nozzle onto the canister valve and press. If necessary, repeat the application of solvent several times and use absorbent paper to help.
The Solvente per schiuma poliuretanica must be stored in an upright position at a temperature of +5/+30 °C. Under these conditions, the product has a shelf life of at least 36 months. Cylinders that have not been completely used up can be stored for approximately 6 months if kept tightly sealed.
Warning! The Solvente per schiuma poliuretanica may dissolve or discolour the surfaces to which it is applied (varnish, paint, synthetic materials, fabrics, etc.). Therefore, before use, always carry out a test on an inconspicuous area to ensure that the surface is not damaged.
| Code | Packaging | Packaging size | Barcode |
|---|---|---|---|
| 15010 | can | 12 x 500ml |
Rapid removal of uncured polyurethane foam from any surface that may have been soiled. Professional cleaning of foam dispensing guns immediately after extrusion. The Solvente per schiuma poliuretanica does not dissolve cured foam, even after prolonged application: in such cases, removal can only be carried out mechanically using a scraper or sandpaper.
Contact our team for personalized support and product guidance.