Quarz Sand
Oven-dried, washed quartz sand, intended for use as a filler in epoxy and polyurethane resin systems.
Oven-dried, washed quartz sand, intended for use as a filler in epoxy and polyurethane resin systems.
Application areas
Choose Quarz Sand for
- Production of resin-based mortars for screed coatings or for floor repairs.
- Production of self-levelling resin-based fluid mortars or for skimming cementitious surfaces.
- Production of self-levelling, multi-layer or screed resin coatings. Quartz sands can be mixed with epoxy or polyurethane resins for this purpose. They can also be used to produce resin mortars for grouting, repairing joints or holes in floors, creating chamfers or transitions, etc.
- Finally, quartz sands can be used for embedding in still-fresh resin layers to increase their thickness and roughen the surface where non-slip finishes are required or to improve the adhesion of any subsequent layers of further resinous or cementitious products.
- For the correct choice of sand mixture type, application method and consumption, please refer to the technical data sheets of the resin or cementitious products to be applied.
- Application on resinous substrates in multi-layer coatings or as a bonding layer for subsequent applications of resinous or cementitious products.
- Creation of non-slip finishes.
Discover more
Other solutions you might be interested in
Epox Grip
Epoxy resin for the pre-treatment of absorbent surfaces prior to…
Epoxy resin for the pre-treatment of absorbent surfaces prior to the application of epoxy or polyurethane resins, or waterproofing products from the Polyurea range. It can be used as a primer or for the creation of quartz-filled epoxy screeds, as it complies with the requirements of standard EN 13813.
Fast Screed
Pre-mixed cementitious mortar with semi-rapid setting and drying, class CT…
Pre-mixed cementitious mortar with semi-rapid setting and drying, class CT C25 F4 according to EN 13813, for the construction of bonded, self-supporting, floating and heated screeds, both indoors and outdoors.
Screed
Medium-drying, premixed cementitious mortar, class CT C20 F5 according to…
Medium-drying, premixed cementitious mortar, class CT C20 F5 according to EN 13813, for the production of adherent or floating screeds.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
PU HM Edilia
High performance polyurethane adhesive/sealer for façades and floors.
High performance polyurethane adhesive/sealer for façades and floors.
Synthetic Plugging Cord
Closed-cell polythene plugging cord of variable thickness for preparation ofexpansion…
Closed-cell polythene plugging cord of variable thickness for preparation ofexpansion joints.
Livellina 0-10
Self-levelling screed for irregular surfaces, up to 10 mm thickness,…
Self-levelling screed for irregular surfaces, up to 10 mm thickness, also for heated floors.
Livellina 5-30
Self-levelling screed for irregular surfaces, from 5 to 30 mm…
Self-levelling screed for irregular surfaces, from 5 to 30 mm thickness, also for heated floors.
Floorrep
Self-levelling rapid cement mortar for repairing industrial floors with thickness…
Self-levelling rapid cement mortar for repairing industrial floors with thickness of 3 mm to 30 mm.
Low Modulus
Neutral silicone sealant with an extremely low modulus of elasticity,…
Neutral silicone sealant with an extremely low modulus of elasticity, for use on façades and floors.
Floor
Neutral curig silicone sealant for floor applications.
Neutral curig silicone sealant for floor applications.
Quarz
Pre-mixed anti-wear dry-shake finish for industrial floors, class CT-C70-F7-AR1 according…
Pre-mixed anti-wear dry-shake finish for industrial floors, class CT-C70-F7-AR1 according to EN 13813 - material for cement-based screeds for use inside buildings.
Details
Quartz sand consisting of selected high-purity quartz grains, washed and oven-dried, with a particle size distribution of 0.8–1.2 mm, for use with epoxy or polyurethane resins in the production of protective coatings, fillers, repairs, screeds, FRP reinforcements, skim coats, etc.
Instructions for use
Quartz sand can be mixed with epoxy or polyurethane resins to create self-levelling, multi-layer or mortar screed resin coatings. It can also be used to produce resin mortars for grouting, repairing joints or holes in floors, creating chamfers or transitions, etc.
Finally, quartz sand can be used for embedding in still-fresh resin layers to increase their thickness and roughen the surface where non-slip finishes are required or to improve the adhesion of any subsequent layers of further resinous or cementitious products. Depending on the intended use, it can be mixed with the resin matrix in a ratio of 1:0.5 up to 1:5.
Storage
The product must be stored in its original packaging in a dry place.
Warnings
- Quartz sand is not classified as hazardous under current regulations on the classification of substances and mixtures.
- It is recommended that you wear gloves and safety goggles and take the usual precautions when handling chemicals.
| Code | Detail | Packaging size | Pallet | Barcode |
|---|---|---|---|---|
| 8526 | 0.4 mm | 25kg |
40 bags
|
|
| 8495 | 1.2 mm | 25kg |
40 bags
|
|
- Production of resin-based mortars for screed coatings or for floor repairs.
- Production of self-levelling resin-based fluid mortars or for skimming cementitious surfaces.
- Production of self-levelling, multi-layer or screed resin coatings. Quartz sands can be mixed with epoxy or polyurethane resins for this purpose. They can also be used to produce resin mortars for grouting, repairing joints or holes in floors, creating chamfers or transitions, etc.
- Finally, quartz sands can be used for embedding in still-fresh resin layers to increase their thickness and roughen the surface where non-slip finishes are required or to improve the adhesion of any subsequent layers of further resinous or cementitious products.
- For the correct choice of sand mixture type, application method and consumption, please refer to the technical data sheets of the resin or cementitious products to be applied.
- Application on resinous substrates in multi-layer coatings or as a bonding layer for subsequent applications of resinous or cementitious products.
- Creation of non-slip finishes.
Depending on the intended use, it can be diluted with the matrix resin in a ratio ranging from 1:1 to 1:8.
Still missing information?
Contact our team for personalized support and product guidance.