Polyurea Finish
A flexible, UV-resistant, solvent-free acrylic protective coating in water-based dispersion for indoor and outdoor use.
A flexible, UV-resistant, solvent-free acrylic protective coating in water-based dispersion for indoor and outdoor use.
- Flexible protective coating for indoor and outdoor applications
- Hydrophobicity and excellent resistance to standing water
- Excellent adhesion to various substrates
- No yellowing and UV resistance
- Excellent resistance to weathering, atmospheric agents and ageing
- Resistance to cracking and chalking
- Alkali resistance
- Low dirt pick-up
- Matt finish
- Can be applied at temperatures between +10 °C and +35 °C on the substrate
- Operating temperature from -30 °C to +90 °C in air
Discover more
Other solutions you might be interested in
Aquatech Neo
A quick-drying, single-component, flexible, liquid waterproofing membrane for indoor use.
A quick-drying, single-component, flexible, liquid waterproofing membrane for indoor use.
Polyurea HM
A two-component membrane based on pure polyurea, to be applied…
A two-component membrane based on pure polyurea, to be applied by spraying using a high-pressure twin-mixer pump for the on-site creation of a waterproof coating on various types of substrate, where high adhesion, elasticity and tear resistance are required.
Polyurea HYB
A two-component hybrid polyurea membrane, to be applied by spraying…
A two-component hybrid polyurea membrane, to be applied by spraying using a high-pressure bi-mixer pump for the on-site creation of a waterproofing membrane on various types of substrate.
Waterblock
Ready-to-use, non-silicone, ready-to-use, mineral solvent-based, breathable, colourless liquid waterproofing agent…
Ready-to-use, non-silicone, ready-to-use, mineral solvent-based, breathable, colourless liquid waterproofing agent for pedestrian floors, specifically for ceramic, stoneware, klinker, terracotta and wood floors.
Aquatech® Rapid
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for…
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for exterior and interior waterproofing.
Aquatech®
Single-component liquid waterproofing membrane in a water-based emulsion.
Single-component liquid waterproofing membrane in a water-based emulsion.
Promural® Silicon
Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved…
Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.
Emulsione Epossidica 723
Protective, water-based, type C, two-component epoxy resin paint, according to…
Protective, water-based, type C, two-component epoxy resin paint, according to EN 1504-2.
Epoxy
Two-component epoxy protection coating.
Two-component epoxy protection coating.
Details
Instructions for use
Substrate preparation
Substrate preparation is essential; therefore, the surface to be treated must be free from any contaminants, dry, sound, and have a tensile strength of at least 1.5 MPa. In all cases, the surface must be prepared by high-pressure washing, sandblasting or sanding, depending on the condition of the surface. Any water from washing or weather conditions must be removed or dried using appropriate methods.
Primer
Concrete surfaces must be levelled to the required thickness using a repair mortar or a levelling compound such as Restauro Finitura. In the case of absorbent surfaces, Epox Grip must be applied to seal and regulate the substrate’s absorbency.
Product preparation
Ready-to-use single-component product. Mix thoroughly before use and dilute with 1–5% water if necessary.
Application
Polyurea Finish can be applied either by roller or airless spray. The product can be applied directly to concrete.
Storage
When kept in its original sealed packaging, stored in a dry, sheltered place at a temperature between +5 °C and +35 °C, the product has a shelf life of 6 months. Keep away from frost.
Warnings
Only apply Polyurea Finish if the surface temperature is at least 3 °C higher than the dew point.
| Color | Code | Packaging size | Pallet | Barcode |
|---|---|---|---|---|
| Coloured | 8470 * | 10kg |
40 buckets
|
|
Protective coating for polyurethane elastomeric coatings from the Flex PU range and for polyurea coatings from the Polyurea range.
| Entry | Value | Reference standard |
|---|---|---|
| Colour | RAL colour chart | – |
| Density | 1.44 ± 0.05 kg/l | EN ISO 2811-1 |
| Viscosity at 20°C | 10,000 ± 2,000 mPa·s | EN ISO 2555 |
| Theoretical thickness | 110–165 µm | – |
| Non-volatile substances
By weight By volume |
72% 60 % |
EN ISO 3251 |
| Maximum deformation | 300 ± 50 % | EN 12311-2 |
| Artificial weathering test
Exposure to UV and humidity cycles for 2000 hours, thickness 200 µm |
No swelling, no cracking, no delamination | EN 1062-11 |
| Carbon dioxide permeability | sD > 50 m | EN 1062-6 |
| Water vapour permeability | sD < 5 m | EN ISO 7783-2 |
| Capillary absorption and water permeability | w < 0.1 kg/m² × h0.5 | EN 1062-3 |
| Chemical resistance | Sodium chloride 20 % – Class II | EN 13529 |
Theoretical consumption: 300–400 g/m²
Still missing information?
Contact our team for personalized support and product guidance.