GP 100
Ready-to-use paste putty for indoor use.
Ready-to-use paste putty for indoor use.
Application areas
Choose GP 100 for
- Render of masonry or plasterboard surfaces
- The treatment of walls and ceilings made of gypsum, concrete or plaster or cement-lime mortars even if in the raw state.
Discover more
Other solutions you might be interested in
Panel life Ceiling
Calcium silicate panel for insulation of thermal bridges in the…
Calcium silicate panel for insulation of thermal bridges in the ceilings in the Wall Remedy System.
Panel life Window
Calcium silicate panel for internal insulation of window relief patterns…
Calcium silicate panel for internal insulation of window relief patterns in the Wall Remedy System.
R.E.D.
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from…
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from 3 to 40 mm. Skim plaster for façade renovation with very high adhesion power and excellent workability, type GP CSII Wc0, according to EN 998-1, for restoration and levelling work, for thickness from 3 to 40 mm. For manual and machine applications.
Rinzaffo
Rendering coat for renovating and/or dehumidifying plasters.
Rendering coat for renovating and/or dehumidifying plasters.
Risan One
Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation…
Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation plasters on masonry affected by rising damp and saline efflorescence.
Stuccosol
Very fine cement mortar for grouting and smoothing cement elements.
Very fine cement mortar for grouting and smoothing cement elements.
Bond & Finish
Pre-mixed mineral mortar to be used to lay calcium-silicate panels,…
Pre-mixed mineral mortar to be used to lay calcium-silicate panels, both as an adhesive for bonding to the support, and for the finishing and smoothing of fiberglass reinforcing mesh.
Panel life
Calcium silicate panel for interior applications, to resolve the problems…
Calcium silicate panel for interior applications, to resolve the problems of surface condensation, mould and harmful salts.
Shield
Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent…
Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent surfaces.
Deep Cleaner
Biocide for sanitizing surfaces with mould and microbiological growths.
Biocide for sanitizing surfaces with mould and microbiological growths.
DP 501
Premixed cementitious mortar for dehumidifying plasters.
Premixed cementitious mortar for dehumidifying plasters.
Intonaco WTA
Premixed plastering mortar for the renovation of masonry subject to…
Premixed plastering mortar for the renovation of masonry subject to rising capillary damp, according to EN 998-1 type R, WTA certified.
Details
GP 100 is a ready-to-use paste putty for indoor use ideal for rendering masonry or plasterboard surfaces, suitable for the treatment of walls and floors made of gypsum, concrete or plaster or cement-lime mortars, even if in its raw state.
Instructions for use
Preparation for use
Thoroughly clean the surface to be treated by completely removing any residue of dust, grease and efflorescence.
Instructions for use
Load the trowel with GP 100 and apply it to the surface. In case of high thickness (over 1.5 mm) it is recommended to fill the surface with several subsequent applications. Paints and coatings must be applied when the product is completely dry.
It is recommended to close the package carefully after partial use and be careful not to pollute the unused product with dry residues or uncleaned tools.
Storage
Store GP 100 in a dry place protected from heat and frost. It will keep for at least 12 months in the original unopened packaging. PROTECT FROM HUMIDITY.
Warnings
- Do not add other materials to the ready product.
- Do not apply GP 100 at temperatures below +5 °C. Store the product in a dry place, away from heat and frost.
- Paints and coatings must be applied when the product is completely dry.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| White | 8063 | bucket | 5 kg |
120 buckets
|
|
| White | 8064 | bucket | 20kg |
44 buckets
|
|
GP 100 is suitable for:
- Render of masonry or plasterboard surfaces
- The treatment of walls and ceilings made of gypsum, concrete or plaster or cement-lime mortars even if in the raw state.
| Appearance | Pasty |
The consumption of GP 100 is approx. 14 kg/m2/cm.
Still missing information?
Contact our team for personalized support and product guidance.