Waterproofing

Our waterproofers prevent damage from moisture – because a simple silicone joint does not replace a complete waterproofing. Be it in the sanitary area as well as on the roof or in the basement. Our products help your building to stay dry, because in the worst case, moisture can lead to permanent damage.

Flex PU Primer

Polyurethane based primer, with low viscosity, suitable for porous and non-porous substrates.

Flexistar

Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
EC1_(GB)_black_CPIMCIR_EN1504-2CMP_EN14891

Flexistar Rapid

Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast hardening.
DM_EN14891

Flex 1K

Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.
EC1plus_(GB)_black_CPIMCIR_EN1504-2CMP_EN14891

Flex 2K

Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
CPIMCIR_EN1504-2CM02P_EN14891Übereinstimmungszeichen – caso 1

Stop

Very fast-setting pre-mixed mortar.

Promural Silicon

Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.
PIMCIR_EN1504-2

Epoxy

Two-component epoxy protection coating.
PIMCIRPRRC_EN1504-2

Aquatech

Single-component liquid waterproofing sheath in water emulsion.
EC1plus_(GB)_black_DM01P_EN14891Übereinstimmungszeichen – caso 2

Aquatech Rapid

Fast-drying, elastic liquid membrane for indoor waterproofing.

Flex PU

Single-component polyurethane liquid membrane for waterproofing and protection. Suitable for waterproofing and protection of roofs, lightweight sheet metal or fibre cement roofs, asphalt membranes, parking lots and stadium stands, bridge platforms and irrigation channels.
EOTA

Flex PU 2K

Two-component, solvent-free thixotropic coating, suitable for waterproofing and protecting tanks.

Flex PU Finish

Single-component non-yellowing elastic membrane for protection and waterproofing.
EOTA

Asfredol 1000

Cold asphalt, composed of an anionic bituminous emulsion, free of organic solvents, for waterproofing and surface protection of porous surfaces, both wet and dry.
CPIMCIR_EN1504-2

Sitol A

Bituminous, waterproofing and anti-corrosion paint.
CPIMCIR_EN1504-2

Black Hydro Easy

Multipurpose, thixotropic, bituminous liquid waterproofer made up of inert fillers, elastomeric resins and additives. Suitable for waterproofing earth retaining foundation walls. Used as sealant and finisher for roof waterproofing and insulation panel bonding applications.
CPIMCIR_EN1504-2DMO2_EN14891

Black Hydro Light

Elastomeric bituminous waterproofer lightened with rubber granules for waterproofing horizontal and vertical concrete and brick surfaces.
CPIMCIR_EN1504-2

Black Hydro Pittura

Solvent-based protective and decorative paint, based on bitumen, aluminium paste, selected synthetic resins and special additives.

Black Hydro Spray

Solvent-based bituminous waterproofing protective sealant in spray can, suitable on any type of substrate.

BW 100

Bituminous liquid waterproofer.
PIMCIR_EN1504-2

BW 200

Multi-function bituminous waterproofer.
CPRPIMCIR_EN1504-2DM01_EN4891