Anchoring and Mounting

Reliability, innovation and responsibility are the hallmarks of Torggler products. These three values are also reflected in our anchoring and fixing systems combined with long-term performance. Our products cover a wide range of applications, from the simplest and most practical to the most technically demanding, in order to meet all specific requirements.

Xtreme Grip Epoxy

Two-component epoxy resin-based chemical anchor without styrene for high performance structural fixings, on cracked/un-cracked concrete, solid brick masonry, stone and wood supports.
Émissions dans l’air intérieur A+

Xtreme Grip Vinylester

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.
Émissions dans l’air intérieur A+

Espansol Ancor

Pre-mixed, fluid, self-levelling cementitious mortar for anchoring and precise grouting works.
R4PCC_EN1504-3 EN1504-6

Flash

Extra-fast setting, premixed cementitious mortar for small installation works.
R1_EN1504-3

Epox Ripresa

Two-component epoxy adhesive for concrete casting joints.  

CA Poly

Two-component polyester resin-based chemical anchor without styrene for fixing medium-light loads on un-cracked concrete, solid and perforated brick masonry and autoclaved cell concrete.
Émissions dans l’air intérieur A+

CA Vinyl

Two-component epoxyacrylate resin-based chemical anchor without styrene for fixing medium-heavy loads on un-cracked concrete, solid and perforated brick masonry, stone and wood supports.
Émissions dans l’air intérieur A+

Chemical Anchor Cage 12×80

Cage for application of chemical anchors on perforated bricks in combination with M8 threaded rods (hole diameter 12 mm, hole length 80 mm).

Chemical Anchor Cage 20×85

Cage for application of chemical anchors on perforated bricks in combination with M12-M16 threaded rods (hole diameter 20 mm, hole length 85 mm).

Chemical Anchor Cage 15×85

Cage for application of chemical anchors on perforated bricks in combination with M10-M12 threaded rods (hole diameter 15 mm, hole length 85 mm).

Window frame screw for aluminium

Special screw made of galvanised steel for fixing aluminium profiles on concrete, with high-low thread, reduced cylinder head, TX30 drive and various lengths from 50 to 300 mm.

Window frame screw for PVC and wood

Special screw made of galvanised steel for fixing PVC and wood profiles to concrete, with high-low thread, flat countersunk head, TX30 drive and various lengths from 50 to 300 mm.