Panel life
Calcium silicate panel for interior applications, to resolve the problems of surface condensation, mould and harmful salts.
Calcium silicate panel for interior applications, to resolve the problems of surface condensation, mould and harmful salts.
- Good thermal insulation
- High water vapour diffusion
- Non-combustible
- Natural non-hydraulic lime and silicate based product
- Can prevent the formation of surface condensation
- Simple, fast and economical to use
Application areas
Choose Panel life for
- Indoor environments with a high amount of rising damp
- Rooms with poor thermal insulation and thermal bridges
- Walls and ceilings that have a high amount of mould and microbiological growth
Discover more
Other solutions you might be interested in
Panel life Ceiling
Calcium silicate panel for insulation of thermal bridges in the…
Calcium silicate panel for insulation of thermal bridges in the ceilings in the Wall Remedy System.
Panel life Window
Calcium silicate panel for internal insulation of window relief patterns…
Calcium silicate panel for internal insulation of window relief patterns in the Wall Remedy System.
R.E.D.
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from…
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from 3 to 40 mm. Skim plaster for façade renovation with very high adhesion power and excellent workability, type GP CSII Wc0, according to EN 998-1, for restoration and levelling work, for thickness from 3 to 40 mm. For manual and machine applications.
Rinzaffo
Rendering coat for renovating and/or dehumidifying plasters.
Rendering coat for renovating and/or dehumidifying plasters.
Risan One
Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation…
Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation plasters on masonry affected by rising damp and saline efflorescence.
Stuccosol
Very fine cement mortar for grouting and smoothing cement elements.
Very fine cement mortar for grouting and smoothing cement elements.
Bond & Finish
Pre-mixed mineral mortar to be used to lay calcium-silicate panels,…
Pre-mixed mineral mortar to be used to lay calcium-silicate panels, both as an adhesive for bonding to the support, and for the finishing and smoothing of fiberglass reinforcing mesh.
Shield
Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent…
Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent surfaces.
Deep Cleaner
Biocide for sanitizing surfaces with mould and microbiological growths.
Biocide for sanitizing surfaces with mould and microbiological growths.
GP 100
Ready-to-use paste putty for indoor use.
Ready-to-use paste putty for indoor use.
DP 501
Premixed cementitious mortar for dehumidifying plasters.
Premixed cementitious mortar for dehumidifying plasters.
Intonaco WTA
Premixed plastering mortar for the renovation of masonry subject to…
Premixed plastering mortar for the renovation of masonry subject to rising capillary damp, according to EN 998-1 type R, WTA certified.
Details
- Good thermal insulation
- High water vapour diffusion
- Non-combustible
- Natural non-hydraulic lime and silicate based product
- Can prevent the formation of surface condensation
- Simple, fast and economical to use
Calcium silicate panel for interior applications, non-combustible, environmentally friendly, with high capillary capacity for absorption of moisture, with excellent vapour permeability and thermal insulation for solving recurring problems of damp, mould or poor domestic climate control. Also suitable for restoration of historic buildings, surface condensation, mould and harmful salts.
Instructions for use
After properly evaluating the conditions, prepare the substrate for the eventual application with Deep Cleaner if mould and microbiological growth are present on the surface, thus removing the surface growth by mechanical means; after apply a primer coat of Shield to the Panel life soffit wait a few hours – depending on weather conditions – then lay the Panellife using Bond & Finish as an adhesive. Complete the installation process by leveling Panel life with Bond & Finish, inserting the Rete SSA fiberglass mesh before the finishing coat.
Warnings
- Do not use for outdoor applications
- Do not apply under direct sunlight, under highly humid conditions or in the presence of strong wind.
- When applying and working the system, the temperature of the surrounding environment and the substrate must be between +5°C and +30°C.
- Protect from frost for at least 3 days while the system is hardening
| Color | Code | Dimensions | Thickness | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|---|---|
| Grey | 15623 | 1000x610 mm | 25 mm | package | 8 piece |
144 pieces
|
|
- Indoor environments with a high amount of rising damp
- Rooms with poor thermal insulation and thermal bridges
- Walls and ceilings that have a high amount of mould and microbiological growth
| PARAMETER AND TEST METHOD | VALUE |
| Density | 225 kg/m3 |
| pH | 10 |
| Resistance to compression | 2,6 N/mm2 |
| Total porosity (EN 993-1) | 91% |
| Short-term water absorption (EN ISO 29767) | 28 kg/m2 |
| Water vapour permeability µ | 3 |
| Thermal conductivity λ10 dry | 0,068 W/mK |
| Acoustic reduction index (RW(C;Ctr) (thickness 25mm) | 25 (-2;-4) dB |
| Thermal resistance (thickness 25mm) | 0,37 (m²×K)/W |
| Fire behaviour (EN 13501-1:2007 – A1:2009) | A1 |
Still missing information?
Contact our team for personalized support and product guidance.