Evaproof Adhesive

A flexible, UV-resistant, solvent-free acrylic protective coating in water-based dispersion for indoor and outdoor use.

A quick-drying, single-component, flexible, liquid waterproofing membrane for indoor use.

A three-component, thixotropic epoxy-cementitious mortar, suitable for protecting and levelling both vertical and horizontal surfaces exposed to moisture and requiring good chemical resistance and high abrasion resistance.

Rasoepoxy It is a two-component epoxy system, consisting of epoxy resins. It is designed to cure even on damp surfaces, both indoors and outdoors, forming a compact, waterproof layer with high abrasion resistance. It is suitable for subsequent coating with epoxy or polyurethane finishes, or with waterproofing products from the Polyurea range.

A fast-drying, single-component polyurethane primer for touch-ups or overcoating of polyurethane and polyurea-based products.

A two-component membrane based on pure polyurea, to be applied by spraying using a high-pressure twin-mixer pump for the on-site creation of a waterproof coating on various types of substrate, where high adhesion, elasticity and tear resistance are required.

A two-component hybrid polyurea membrane, to be applied by spraying using a high-pressure bi-mixer pump for the on-site creation of a waterproofing membrane on various types of substrate.

PVC drain with vertical outlet, fitted with a square-shaped waterproof membrane flange (50 cm x 50 cm). The drain, available in various diameters (Ø75, Ø90 or Ø110 mm), is compatible with Evaproof waterproof membrane systems.

Thermoformed waterproofing element for sealing external/internal corners. It is used in conjunction with Evaproof Band, and Evaproof Adhesive (a polyurethane adhesive) must be used for its installation.

A flexible, waterproof polyolefin elastic tape produced by extrusion, used in conjunction with Evaproof Adhesive polyurethane adhesive to ensure a continuous waterproofing seal in Evaproof membrane systems and for the treatment of vertical upstands.

A flexible, multi-layered, waterproof polyolefin membrane, designed to prevent cracking and separate structures, manufactured by extrusion, with a thickness of 1.25 mm and a weight of 525 g/m^², coated on both sides with polyester/polypropylene fibre fabric to ensure better adhesion to the cementitious adhesive.

Epoxy resin for the pre-treatment of absorbent surfaces prior to the application of epoxy or polyurethane resins, or waterproofing products from the Polyurea range. It can be used as a primer or for the creation of quartz-filled epoxy screeds, as it complies with the requirements of standard EN 13813.