Restoration

The main causes of deterioration of plasters and masonry are in most cases due to ascending moisture and infiltration humidity. In both cases, water penetrates the masonry and carries the salts dissolved in it. With this in mind, Torggler has developed products with very high levels of performance in order to solve even the most critical moisture problems and guarantee their long-term effectiveness.

® Hydro Light>Mastofix® Hydro Light

Hydrophobised skimming adhesive in powder form based on cement, selected mineral aggregates, EPS spheres, additives. For bonding and skimming EPS insulation boards, MW rock wool, and PIR foamed polyiso foam.
LWCSIIWc2_EN998-1

Rete SSA

160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.

® Light>Mastofix® Light

Adhesive and levelling compound based on cementitious, selected mineral aggregates, EPS fibres, additives. For bonding and smoothing of EPS, MW, and PIR-coated polyiso foam insulation panels.
LWCSIIWc2_EN998-1

Neoplast Latex

Adhesive and plasticising additive for the construction of renders and bridges.

Neoplast Grip

Modifier for cement and hydraulic lime based on special latex, highly saponification-resistant, flexibilising and strongly adhesive effect.

Multimix Evo

Quick-setting pre-mixed and fibre-reinforced mortar for restoration, renovation and levelling work both on façades and floors in thickness from 3 to 50 mm. Good adhesion and excellent workability. For manual and machine applications.
EC1plus_(GB)_black_ GPCSIVW2_EN998-1 CTC20F5_EN13813

Ekomix Plus

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.
GPCSIVWc1_EN998-1

Ekomix

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and rendering polystyrene insulation panels. Component of the Ekomix EPS system.
GPCSIVWc1_EN998-1

Antisale

Universal keying agent for protection against saline efflorescence.

Shield

Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent surfaces.

Deep Cleaner

Biocide for sanitizing surfaces with mould and microbiological growths.

Rinzaffo

Rendering coat for renovating and/or dehumidifying plasters.
GPCSIVWc2_EN998-1

Risan One

Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation plasters on masonry affected by rising damp and saline efflorescence.
R_EN998-1

Intonaco WTA

Premixed plastering mortar for the renovation of masonry subject to rising capillary damp, according to EN 998-1 type R, WTA certified.
R_EN998-1 Sanierputz WTA

DP 501

Premixed cementitious mortar for dehumidifying plasters.
R_EN998-1

Finitura

Breathable, fine-grain premixed mortar for the finishing of renovating and/or dehumidifying plasters.
GPCSIWc2_EN998-1

Finissimo

Very fine, water-repellent, breathable, premixed mortar to give a smooth finish to traditional indoor and outdoor renovation and/or dehumidifying plasters.
GPCSIIWc1 – EN998-1

Bond & Finish

Pre-mixed mineral mortar to be used to lay calcium-silicate panels, both as an adhesive for bonding to the support, and for the finishing and smoothing of fiberglass reinforcing mesh.
GPCSIVWc1_EN998-1

life>Panel life

Calcium silicate panel for interior applications, to resolve the problems of surface condensation, mould and harmful salts.
ETA_web Émissions dans l’air intérieur A+

Multifinish

Fibre-reinforced, thixotropic, cementitious mineral mortar for repairing and finishing various types of surfaces, up to 10 mm thickness.
EC1plus_(GB)_black_ CMCIR_EN1504-2 GPCSIVWc1_EN998-1

R.E.D.

Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from 3 to 40 mm. Skim plaster for façade renovation with very high adhesion power and excellent workability, type GP CSII Wc0, according to EN 998-1, for restoration and levelling work, for thickness from 3 to 40 mm. For manual and machine applications.
GPCSIIWc0 – EN998-1

Stuccosol

Very fine cement mortar for grouting and smoothing cement elements.
GPCSIVWc0_EN998-1

GP 100

Ready-to-use paste putty for indoor use.