Primer VIP
Universal pigmented primer with high filling and masking power, suitable for application of paste coatings on plasters, reinforced skim coats and eTics systems.
Universal pigmented primer with high filling and masking power, suitable for application of paste coatings on plasters, reinforced skim coats and eTics systems.
- High filling and masking power
- Suitable for eTics systems
Variations
Choose the perfect solution for your project
White
Coloured
Application areas
Choose Primer VIP for
- Unpainted walls
- Walls painted with tempera paints
- Walls painted with washable water-based paints
Application areas
Where Primer VIP performs best
Discover more
Other solutions you might be interested in
Finish Calce
Finish Calce is a lime-based paint with outstanding water vapour…
Finish Calce is a lime-based paint with outstanding water vapour permeability, resistance to mould and bacteria, adhesion to the substrate and stability over time.
Finish Silikat
Interior wall paint based on potassium silicate, inorganic pigments, selected…
Interior wall paint based on potassium silicate, inorganic pigments, selected aggregates, micronised calcium carbonate and stabilising additives.
Wash
Matt low-emission vinyl resin paint for interior wall surfaces, washable,…
Matt low-emission vinyl resin paint for interior wall surfaces, washable, very high coverage and filling, ideal for masking imperfections in the substrate.
Mineral Skin
White, hydrophobised, mineral coating for interior walls as well as…
White, hydrophobised, mineral coating for interior walls as well as for facades on priming plaster and insulation panels.
Breathe
Vinyl resin-based paint for interior wall surfaces, highly breathable ideal…
Vinyl resin-based paint for interior wall surfaces, highly breathable ideal for areas exposed to condensation such as bathrooms and kitchens.
Clean
Vinyl resin-based paint for interior wall surfaces, highly breathable and…
Vinyl resin-based paint for interior wall surfaces, highly breathable and anti-mould function, ideal for renovating mould-prone rooms such as laundries, bathrooms and kitchens.
Skin Acryl
Acrylic protective coating with compacted skim effect.
Acrylic protective coating with compacted skim effect.
Finish Siloxan
Smooth siloxane paint with lotus effect.
Smooth siloxane paint with lotus effect.
Skin Siloxan
1.0 / 1.2 / 1.5 mm siloxane-fibre-reinforced coating with a…
1.0 / 1.2 / 1.5 mm siloxane-fibre-reinforced coating with a skimmed appearance.
Finish Acryl
Quartz-based acrylic paint for exterior wall surfaces with high filling…
Quartz-based acrylic paint for exterior wall surfaces with high filling power. Water-repellent, contains special anti-algae and anti-mould protective film.
Skin Acriloxan
Fibre-reinforced acryl-siloxane coating with compacted skim coat effect.
Fibre-reinforced acryl-siloxane coating with compacted skim coat effect.
Consolida
Highly penetrating water-based levelling and consolidating fixative.
Highly penetrating water-based levelling and consolidating fixative.
Details
Instructions for use
Product dilution and preparation
Dilute with 5 – 10% water by volume. Mix thoroughly. Application tools: Brush, wool roller.
SUBSTRATE PREPARATION
Unpainted wall surfaces If the substrates are not particularly absorbent, apply 1 or 2 coats of Primer VIP directly.
Wall surfaces painted with tempera paints.
If the surface is not particularly crumble, clean the surface thoroughly, fill in any imperfections with putty, smooth with sandpaper and remove dust. Apply 1 or 2 coats of VIP Primer directly. In the case of particularly crumble tempera paints, remove the film, apply 1 coat of acrylic fixative and after 6/12 hours proceed with the application of 1 or 2 coats of Primer VIP.
Wall surfaces painted with washable water-based paints
Thoroughly clean the surface, fill in any imperfections with putty, smooth with sandpaper and remove dust. Then directly apply 1 or 2 coats of Primer VIP.
Application
Apply Primer VIP with brush or wool roller.
Tools cleaning
Clean the tools with water immediately after use.
Rainwater resistance
The product completes the drying and curing process within 8÷10 days under optimal environmental conditions (15÷35°C; R.H. max. 75%). If the product, during this period of time undergoes runoff from rainwater, it could result in unsightly drippings with a translucent and sticky appearance. This phenomenon, which is temporary in nature, does not affect the quality characteristics of the product and can be easily eliminated by hydro-washing or by waiting for the next rainy event.
Safety precautions
- Keep the can tightly closed and frost-free;
- Safety information for the user is contained in the relevant safety data sheet;
- Empty containers or containers with slight traces of dried residual product film must be disposed of according to local regulations;
Warnings
- Environment and substrate conditions: room temperature: min. +5°C / max. +35°C; relative humidity of the environment: < 80%; substrate temperature: min. +5°C / max. +35°C; substrate moisture < 10 of R.H.
- Keep the can tightly closed and protected from frost.
- Safety information for the user is contained in the relevant safety data sheet
- Empty containers or those with slight traces of dried residual product film must be disposed of according to local regulations
| Color | Code | Packaging size | Pallet | Barcode |
|---|---|---|---|---|
| White | 8194 | 14 l |
33 buckets
|
|
| Coloured | 8195 | 14 l |
33 buckets
|
|
- Unpainted walls
- Walls painted with tempera paints
- Walls painted with washable water-based paints
| PARAMETER AND METHOD | MAIN DATA AT 20°C AND 60 % R.H. |
| Appearance and finish | Opaque |
| Theoretical yield per coat (ISO 7254) | 5 ÷ 6 m2/l depending on the absorption of the substrate |
| Dry to the touch | Max 1 h |
| Dry in depth | Max 24 h |
| Overpaintable | 4 ÷ 6 h |
| Bulk density (ISO 2811-1) | ca. 1,47 g/ml |
| Viscosity Brookfield (ASTM D 2196) | ca. 4000 cps |
| Recommended dry thickness (ASTM D 1186) | 30÷50 Micron per hand |
| Flash point (UNI 8909) | Non flammable |
| Storage life (UNI 10154) | Min. 24 Months |
| Binder | Acrylate styrene |
Still missing information?
Contact our team for personalized support and product guidance.