C 2.0

The freshly extruded foam is compact and wind resistant; when hardening it does not lift the bent tiles; once hardened it is waterproof and does not damage them. Applied in dots or on rows, it prevents the installed elements from slipping and guarantees high tear resistance. It maintains its characteristics and performance even at extreme temperatures, provided it is protected from UV rays.

Instructions for use

The installation surfaces must be solid, clean, degreased and consistent. In case of reuse of old bent tiles/roof tile, remove mortar residues or biological patinas. To improve adhesion and obtain a uniform and homogeneous foam structure, slightly moisten the installation substrates. Screw the gun to the ring nut or, in the case of the manual extrusion cylinder, screw the dispenser on the valve and shake vigorously for a long time to obtain good mixing of the components. For faster extrusion, shake the spray can even during installation intervals. Turn the cylinder upside down and extrude C 2.0 along lines or in dots, depending on the method used. The amount of foam to be extruded depends on the type of installation and post-expansion of the foam: in the case of in-line extrusion, interrupt the beads at regular intervals. Any excess exposed to UV rays will wear out without affecting the protected areas.

Storage

Store upright, in a dry place, away from low temperatures, heat and direct radiation.  A temperature between +15 and +25 °C is recommended for effective foam extrusion. In the original packaging it is kept for at least 18 months.

Warnings

• Do not apply at temperatures below 0 °C.
• Use polyurethane foam solvent for cleaning tools and skirtings while C 2.0 is still fresh, mechanically after hardening.
• It does not adhere to oily, PTFE, polyethylene, polypropylene and porous materials totally soaked in water.

The C 2.0 spray can is a pressure vessel. Protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use. Do not spray on a flame or an incandescent body. Extremely flammable: keep away from all sources of combustion. Do not smoke. Especially when several spray cans are used at the same location, there is a danger of forming explosive air/gas mixtures. Keep out of reach of children. Contains diphenylmethane-4,4′ -diisocyanate (EEC No 615- 005-00-9). The use of this product may cause allergic reactions in people already sensitized to diisocyanates. People with asthma, eczema or skin problems should avoid contact, including dermal contact. Use only in a well-ventilated areas. Harmful by inhalation: do not breathe aerosols. In case of insufficient ventilation, use a protective mask with a suitable gas filter (e.g. type A1 according to EN 14387). Irritating to the eyes, respiratory system and skin. May cause sensitization by inhalation and skin contact. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, wash immediately with plenty of soap and water. Wear suitable protective clothing and gloves. In case of accident or if you feel unwell, seek medical advice immediately (show the package label where possible).