Tack

Tack is a one component construction adhesive based on water-dispersed acrylic resins. It is completely solvent-free. The water evaporates to form a high- power adhesive mass for permanent glueing of a wide range of materials. At least one of the two components must be porous and absorbent (concrete, mortar, plaster or similar) to facilitate the evaporation of the water. The formulation of Tack guarantees a high initial adhesion capacity, good workability and exceptional holding of the materials sealed over time. 

Instructions for use

1. The surfaces to be glued must be clean, free of grease and in good condition. The foundation must be able to support the weight of the element to be glued.
2. Cut off the tip of the threaded cartridge and screw on the cap. Cut the cap to obtain a nozzle of the diameter required.
3. Apply the adhesive to the surface and join the two parts by pressing them together firmly. For difficult surfaces (smooth materials), you may have to apply the product to both sides. For porous materials, you only have to apply Tack to one of the two sides.
4. To glue heavy elements or uneven surfaces, the two elements must be held together until the product has set (approx. 24 hours).
5. Remove any excess adhesive with a damp cloth.

Cleaning of tools
Clean your tools with water while the material is still plastic. Once Tack has set, it can only be removed by scraping or with organic solvents (acetone, toluene).

Storage

Tack remains stable for at least 12 months in the original packaging and stored at a temperature above +5 °C