Acrysil PRO
Acrylic-silane sealant for sealing flexible joints.
Acrylic-silane sealant for sealing flexible joints.
- Good resistance to UV rays
- Paintable
- Operating elongation capacity of 15%
Variations
Choose the perfect solution for your project
White
Grey
Application areas
Choose Acrysil PRO for
- masonry and door and window frames
- roller blind boxes and walls
- pre-fabricated wall and ceiling panels
- through pipes and rendering
- for sealing cracks
- flexible sealing of wall panels.
Application areas
Where Acrysil PRO performs best
Discover more
Other solutions you might be interested in
Mirror
Neutral silicone adhesive for bonding mirrors.
Neutral silicone adhesive for bonding mirrors.
Sitol® Primer Glass
Primer formulated as a black pre-treatment for glass surfaces to…
Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.
Sitol® Deck Bonding LV
Low viscosity hybrid adhesive for bonding natural and synthetic teak…
Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Meta 45
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that…
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that enable the creation of vertical lines without dripping and medium curing time.
Adhesive for EPDM membrane
High-viscosity adhesive for the façade application of EPDM membrane on…
High-viscosity adhesive for the façade application of EPDM membrane on vertical and horizontal surfaces.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Sitol® Primer Deck Caulking
Primer for sealants on wooden and porous substrates.
Primer for sealants on wooden and porous substrates.
Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
Sitol® Deck Bonding
Hybrid polymer-based adhesive-sealant with extended open time for natural and…
Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Details
Acrysil Pro is a single-component sealant consisting of acrylic-silane polymers dispersed in a water base. When applied, the product hardens as the water base evaporates to leave a flexible, plastic mass with excellent resistance to ageing. Features excellent adherence to smooth surfaces (such as glass,aluminium etc…) Acrysil Pro becomes rainproof just a few minutes after application. It is therefore ideal for outdoor applications where weather conditions (immediate likelihood of rain) make it difficult to use other sealants. It is easy to apply, does not drip and can be smoothed off quickly. The application tools can be washed with water. It is ideal for sealing indoor and outdoor joints with a maximum expansion of 18%. Acrysil Pro is classified as a non-structural sealant for internal and external facade components (type F-EXT/INT), in accordance with E 15651-1. Acrysil Pro is defined as Class 12.5E in the ISO 11600 Classification.
Instructions for use
- The sides of the joint must be solid, clean and grease-free. Acrysil Pro does not require primer. For porous joints and during the summer months it is advisable to wet the sides of the joint. Deep expansion joints must be plugged with rigid pre-forms shaped foam elements before sealing.
- Apply adhesive tape along the sides of the joint.
- Insert the foil bag in a mechanical or a pneumatic gun, open it, screw on the spout and cut off the tip to obtain a sufficient aperture.
- Extrude an abundant quantity of sealant.
- Smooth off with a damp paint scraper within 5 minutes of application, exerting enough pressure to remove any air bubbles.
Cleaning of tools
Tool used with Acrysil Pro are easy to clean with water while the product is still soft. Hardened product should only be removed by mechanical means or by using organic solvents (acetone, toluene).
Storage
Unopened in its original packaging and stored at temperatures between +5 °C and +30 °C Acrysil Pro will keep for 24 months.
Warnings
Acrysil Pro passes the DIN 52461 rain strength test (immediate) 15 minutes after application. However, the product should not be applied to horizontal joints outdoors where there is a risk of water stagnating. Sealant which has not completely hardened will be damaged by frost.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| White | 5544 | cartridge | 24x310 ml |
64 cardboards
|
|
| White | 5049 | foil bag | 20x600 ml |
36 cardboards
|
|
| Grey | 5138 | foil bag | 20x600 ml |
36 cardboards
|
|
Acrysil Prois suitable for sealing flexible joints in the following application:
- masonry and door and window frames
- roller blind boxes and walls
- pre-fabricated wall and ceiling panels
- through pipes and rendering
- for sealing cracks
- flexible sealing of wall panels.
| PARAMETER AND TEST METHOD | VALUE | |
| Base | 1,50 g/ml | |
| Density (ISO 1183-1/B) | 1,50 g/ml | |
| Application temperature | from +5 °C to +40 °C | |
| Skin-over time (MIT 45*) | approx. 15 minutes | |
| Extrusion speed (MIT 30) | 260 g | |
| Complete hardening (10×10 mm joint at 20 °C – 50% U.R.) | after approx. 5 days | |
|
Resistance to rain
|
after 15 minutes | |
| Operating temperature | from -25 °C to +85 °C | |
| Surface hardness | Shore A/max: 45 |
|
| Surface hardness | Shore A/15: 15 |
|
| Volume change | 24% | |
| Mass variation | 16% | |
|
Drip resistance
|
0% | |
| Tensile strength (DIN 53504 – Punch S3) | 250% | |
| Tensile strength at break (DIN 53504 – Punch S3) | 1,0 N/mm2 | |
| Modulus of elasticity at 100% (DIN 53504 – Punch S3) | 0,9 N/mm2 | |
| Extension to break (ISO 8339/A – Mortar support – M1) | 150% | |
| Tensile extension to break (ISO 8339/A – Mortar support – M1) | 0,17 N/mm2 | |
| Modulus of elasticity at 100% (ISO 8339/A – Mortar support – M1) | 0,20 N/mm2 | |
| Elastic recovery (ISO 7389/B – SMortar support– M1) | 60 % | |
| Maximum operating elongation (ISO 11600) | 18 % | |
| Resistance to acids | poor | |
| Resistance to bases | poor | |
| Odour after cross-linking | odourless |
* Torggler Internal Methods (MIT) are available on request.
| COVERAGE GUIDE TABLE | ||
| JOINT WIDTH X DEPTH (MM) | QUANTITY USED PER LINEAR METRE | LINEAR METRES COVERED WITH ONE CARTRIDGE |
| 6×6 | 36 ml | 16,7 |
| 8×8 | 64 ml | 9,4 |
| 10×10 | 100 ml | 6,0 |
| 15×10 | 150 ml | 4,0 |
| 20×10 | 200 ml | 3,0 |
Still missing information?
Contact our team for personalized support and product guidance.