Floor

Neutral curig silicone sealant for floor applications.

Neutral curig silicone sealant for floor applications.

  • High resistance to UV rays
  • High resistance to traffic
  • Colours: grey

Application areas

Where Floor performs best

Discover more

Other solutions you might be interested in

Details

Silicone Floor is a neutral curing silicone sealant with exceptional resistance to UV-rays and atmospheric agents, its excellent adhesion to the most varied of substrates, its permanent elasticity, perfect seal and a resistance to aging that is greater than any non-silicone resinbased sealant. As well as the above, its true speciality is the Shore surface hardness of the polymerised sealant, which guarantees good resistance to traffic, not only pedestrian footfall but also trolleys and machines. It is also resistant to fuels, oils, grease, detergent solution,  hot water, acid and basic agents, of both organic and inorganic nature. Numerous experiences of application have proven that even after very many years of application, Floor presents no traces of hairline cracks and flaking. Floor is classified as a PW-EXT/INT-CC according to EN 15651-4, i.e. a non-structural sealant for pedestrian walkways for both internal and external uses, including in cold climates.

Instructions for use

  1. The sides of the joint must be clean, degreased and dry.
  2. Apply adhesive tape along the sides of the joint.
  3. First treat with Silicon Primer.
  4. Insert the Torggler pre-form.
  5. Insert the cartridge in the application gun, open it, screw on the spout and cut off the tip to obtain a sufficient aperture.
  6. Smooth off with a damp paint scraper within 5 minutes of application, exerting enough pressure to remove any air bubbles.
  7. Remove the adhesive tape.
  8. Extrude an abundant quantity of sealant.

Cleaning of tools
While the sealant is in the plastic state use solvents; following setting clean only mechanically.

Storage

Floor must be stored in a cool, dry place. Stored in these conditions the product will keep for at least 12 months. Partly used cartridges can be stored for approx. 3 months provided they are tightly closed.

Color Code Packaging Packaging size Pallet Barcode
Grey 7040
6183 cartridge 24x310 ml
64 cardboards
Barcode 8030334061837

With its special features, Floor is much recommended for expansion joints in industrial and public flooring, parking areas, garages etc.

PARAMETER AND TEST METHOD VALUE
Density (ISO 1183-1) 1,39 g/ml
Application temperature from +5 °C to +40 °C
Skin-over time (MIT 33*) approx. 40 minuti
Hardening rate from the outside to the inside at 23 °C (MIT 32*) approx. 3,0 mm in 24 h
Operating temperature from -50 °C to +150 °C
Surface hardness Shore A (DIN 53505) approx. 40
Elongation at break (DIN 53504 – Punch S3) 700%
Tensile strength at break (DIN 53504 – Punch S3) 1,0 N/mm²
Modulus of elasticity at 100% (DIN 53504 -Punch S3) 0,6 N/mm²
Elongation at break (EN ISO 8339/A- Mortar support – M1p a 23 °C) 200%
Tensile strength at break (EN ISO 8339/A – Mortar support – M1p a 23 °C) 0,7 N/mm²
Modulus of elasticity at 100% (EN ISO 8339/A – Mortar support – M1p a 23 °C) 0,62 N/mm²
Elongation at break (EN ISO 8339/A- Mortar support – M1p a -30 °C) 200 %
Tensile strength at break (EN ISO 8339/A – Mortar support– M1p a -30 °C) 0,9 N/mm²
Modulus of elasticity at 60 % (EN ISO 8339/A- Mortar support – M1p a -30 °C) 0,7 N/mm²
Maximum operating elongation 20%
Acid resistance excellent
Base resistance excellent
Odour after curing none
Adhesion on porous and non-porous surfaces excellent

* Torggler Internal Methods (MIT) are available on request.

COVERAGE GUIDE TABLE
JOINT WIDTH X DEPTH (MM)  QUANTITY USED PERLINEAR METRE LINEAR METRES COVEREDWITH ONE CARTRIDGE
6×6  36 ml 8,7
8×8 64 ml 4,9
10×10 100 ml 3,1
15×10 150 ml 2,1
20×10 200 ml 1,5

Technical datasheet

Still missing information?

Contact our team for personalized support and product guidance.