Window
Neutral curing single-component silicone sealant for the installation and sealing of connection and expansion joints between frames and walls.
Neutral curing single-component silicone sealant for the installation and sealing of connection and expansion joints between frames and walls.
- In compliance with UNI 11673
- UV-resistant
- For interior and outdoor use
- MEKO FREE formulation
Variations
Choose the perfect solution for your project
Transparent
White 9010
White 9016
Ivory 1013
Anthracite 7016
Black 9005
Bright grey 7047
Grey 7004
Dark brown 8017
Golden oak 8003
Walnut Nussbaum 8011
Metallic grey 7024
Application areas
Choose Window for
- Sealing the joint between the window frame and the wall
- Single-glazed contact seals
- Sealing of connection and expansion joints on the building envelope and roofing (thinsmith works, etc.)
Application areas
Where Window performs best
Discover more
Other solutions you might be interested in
Mirror
Neutral silicone adhesive for bonding mirrors.
Neutral silicone adhesive for bonding mirrors.
Sitol® Primer Glass
Primer formulated as a black pre-treatment for glass surfaces to…
Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.
Sitol® Deck Bonding LV
Low viscosity hybrid adhesive for bonding natural and synthetic teak…
Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Meta 45
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that…
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that enable the creation of vertical lines without dripping and medium curing time.
Adhesive for EPDM membrane
High-viscosity adhesive for the façade application of EPDM membrane on…
High-viscosity adhesive for the façade application of EPDM membrane on vertical and horizontal surfaces.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Sitol® Primer Deck Caulking
Primer for sealants on wooden and porous substrates.
Primer for sealants on wooden and porous substrates.
Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
Sitol® Deck Bonding
Hybrid polymer-based adhesive-sealant with extended open time for natural and…
Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Details
A neutral, single-component silicone sealant with a low modulus of elasticity and an operating elongation of class 25 LM (±25%). Its characteristics make it suitable for the elastic sealing of joints and expansion joints between frame and wall. Curing takes place by reaction with atmospheric humidity, it does not release odours, like all silicones it is not paintable and cannot be applied on damp surfaces. It has a high resistance to UV radiation, weathering, water stagnation, extreme temperatures and ageing in general. Neutral-based silicones do not corrode metals and have excellent adhesion on smooth and porous substrates. The wide range of colours available is designed to match Window to metal profiles for sheet metal and window frames, whether liquid or powder-coated. In any case, given the multiplicity of paints on the market, it is always recommended to carry out preliminary adhesion tests. In compliance with the installation of windows and doors according to UNI 11673-1.
Instructions for use
- The sides of the joint must be clean, degreased and dry. With porous substrates it is recommended to treat previously with Primer Silicone. In deep expansion joints buffer with before sealing.
- Tape along the sides of the joint.
- Insert the cartridge into the cartridge gun, open it, screw on the nozzle and cut off the tip so that there is a sufficient opening.
- Inject plenty of sealant.
- Smooth with a spatula moistened with Smooth within 5 minutes of application, exerting pressure to eliminate air pockets.
- Remove tape immediately after smoothing.
Cleaning tools: in the plastic state of the sealant with solvents; after hardening only mechanically.
Storage
Window must be stored in a dry and cool environment. Under such conditions, it is stable for at least 18 months. Cartridges that are not completely consumed can be stored for about 3 months if tightly closed.
Warnings
Window is not suitable for structural bonding.
Not suitable for marble or natural stone substrates. In such cases use Marble & Stone or Hybrid LM.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Transparent | 5625 | cartridge | 24x310 ml |
64 cardboards
|
|
| Transparent | 5626 | foil bag | 20x600 ml |
36 cardboards
|
|
| White 9010 | 5627 | cartridge | 24x310 ml |
64 cardboards
|
|
| White 9010 | 5632 | foil bag | 20x600 ml |
36 cardboards
|
|
| White 9016 | 5628 | cartridge | 24x310 ml |
64 cardboards
|
|
| Ivory 1013 | 5631 | cartridge | 24x310 ml |
64 cardboards
|
|
| Anthracite 7016 | 5630 | cartridge | 24x310 ml |
64 cardboards
|
|
| Black 9005 | 5629 | cartridge | 24x310 ml |
64 cardboards
|
|
| Bright grey 7047 | 5644 | cartridge | 24x310 ml |
64 cardboards
|
|
| Grey 7004 | 5683 | cartridge | 12x310 ml |
116 cardboards
|
|
| Dark brown 8017 | 5682 | cartridge | 12x310 ml |
116 cardboards
|
|
| Golden oak 8003 | 5681 | cartridge | 12x310 ml |
116 cardboards
|
|
| Walnut Nussbaum 8011 | 5680 | cartridge | 12x310 ml |
116 cardboards
|
|
| Metallic grey 7024 | 5679 | cartridge | 12x310 ml |
116 cardboards
|
|
| Green 6005 | 5678 | cartridge | 12x310 ml |
116 cardboards
|
|
| Argento 9006 | 5716 | cartridge | 12x310 ml |
116 cardboards
|
|
| Raffaello brown 8017 | 5743 | cartridge | 12x310 ml |
116 cardboards
|
|
- Sealing the joint between the window frame and the wall
- Single-glazed contact seals
- Sealing of connection and expansion joints on the building envelope and roofing (thinsmith works, etc.)
| PARAMETER AND TEST METHOD | BASE TRASPARENTE** | BASE CARICATO*** |
| Density (ISO 1183-1) | 1,02 g/ml | 1,27 g/ml |
| Application temperature | +5 °C to +40 °C | +5 °C to +40 °C |
| Skin-over time (MIT 33*) | 20 minutes | 15 minutes |
| Hardening rate from the outside to the inside at +23 °C (MIT 32*) | 2 mm in 24 h | 1,5 mm in 24 h |
| Operating temperature | -30 °C to +150 °C | -30 °C to +150 °C |
| Surface hardness (ISO 868) | Riva A = 17 | Riva A = 24 |
| Variation in volume (EN ISO 10563) | 5% | |
| Slip resistance (EN ISO 7390) | 0,0 mm | 0,0 mm |
| Elongation at break (DIN 53504 – S3) | 250% | 200% |
| Tensile strength at break (DIN 53504 – S3) | 0,7 N/mm2 | 0,7 N/mm2 |
| Modulus of elasticity at 100% (DIN 53504 – S3) | 0,3 N/mm2 | 0,4 N/mm2 |
| Elongation at break (EN ISO 8339/A – G/Al) | 270% | 210% |
| Tensile strength at break (EN ISO 8339/A – G/Al) | 0,3 N/mm2 | 0,4 N/mm2 |
| Modulus of elasticity at 100% (EN ISO 8339/A – G/Al) | 0,21 N/mm2 | 0,29 N/mm2 |
| Elastic recovery (EN ISO 7389/B – G/Al) | > 70% | > 70% |
| Maximum operating elongation (ISO 11600) | 25% | 25% |
| Acid resistance | excellent | excellent |
| Base resistance | excellent | excellent |
| Odour after curing | none | none |
* Torggler Internal Methods are available on request.
**Grey 7004, Metallic grey 7024, Green 6005, Walnut 8011, Golden oak 8003, Dark brown 8017
***White 9010, White 9016, Ivory 1013, Anthracite 7016, Black 9005, Light Grey 7047
| INDICATIVE TABLE OF CONSUMPTION | |||
| JOINT WIDTH X DEPTH (MM) | COVERAGE PER LINEAR METRE | LINEAR METRES COVERED WITH ONE CARTRIDGE | LINEAR METRES COVERED WITH ONE FOIL BAG |
| 6×6 | 36 ml | 8,7 | 16,7 |
| 8×8 | 64 ml | 4,9 | 9,4 |
| 10×10 | 100 ml | 3,1 | 6,0 |
| 15×10 | 150 ml | 2,1 | 4,0 |
| 20×10 | 200 ml | 1,5 | 3,0 |
Still missing information?
Contact our team for personalized support and product guidance.