Acetic Professional
Acetic curing silicone sealant, resistant to moulds for door and window frames and sanitary use.
Acetic curing silicone sealant, resistant to moulds for door and window frames and sanitary use.
- Resistant to UV-rays
- High resistance to aging
- 4 colours
Variations
Choose the perfect solution for your project
Transparent
White 9010
Application areas
Where Acetic Professional performs best
Discover more
Other solutions you might be interested in
Mirror
Neutral silicone adhesive for bonding mirrors.
Neutral silicone adhesive for bonding mirrors.
Sitol® Primer Glass
Primer formulated as a black pre-treatment for glass surfaces to…
Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.
Sitol® Deck Bonding LV
Low viscosity hybrid adhesive for bonding natural and synthetic teak…
Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Meta 45
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that…
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that enable the creation of vertical lines without dripping and medium curing time.
Adhesive for EPDM membrane
High-viscosity adhesive for the façade application of EPDM membrane on…
High-viscosity adhesive for the façade application of EPDM membrane on vertical and horizontal surfaces.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Sitol® Primer Deck Caulking
Primer for sealants on wooden and porous substrates.
Primer for sealants on wooden and porous substrates.
Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
Sitol® Deck Bonding
Hybrid polymer-based adhesive-sealant with extended open time for natural and…
Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Details
Acetic Professional is a silicone sealant with acetic-crosslinking, it hardens very rapidly and is exceptionally resistant to UV rays and atmospheric agents: it is ideal for use with door and window frames. The presence of an antimicrobial agent and an algae inhibitor in the formulation makes it suitable for sanitary environments too: the product is resistant to boiling water and washing with chemically-aggressive detergents, thus contributing to surface hygiene. Acetic Professional has a resistance to aging that is greater than any other sealant based on non-silicone resins. It has excellent adhesion even without Primer Silicon on glass, stoneware or glazed surfaces and has good adhesion to the majority of non-porous substrates. Acetic Professional is compliant with UNI 11673-1, “Fitting doors and windows Part 1: project verification requirements and criteria”. Acetic Professional is classified as a non-structural sealant for facades (type F-EXT/INT-CC in compliance with EN 15651-1), for glazing (G-CC in compliance with EN 15651-2) and for sanitary uses (type XS) in compliance with EN 15651-3).
Instructions for use
- The sides of the joint must be clean, degreased and dry. With porous substrates it is recommended to first treat with Silicon Primer. With deep dilation joints pad with rigid shaped foam elements before sealing.
- Apply adhesive tape along the sides of the joint.
- Insert the cartridge in the application gun, open it, screw on the spout and cut off the tip to obtain a sufficient aperture.
- Extrude an abundant quantity of sealant.
- Smooth off with a damp paint scraper within 5 minutes of application, exerting enough pressure to remove any air bubbles.
- Remove the adhesive tape.
Cleaning of tools
While the sealant is in the plastic state use solvents; following setting clean only mechanically.
Storage
Acetic Professional must be stored in a cool, dry place. Stored in these conditions the product will keep for at least 24 months. Partly used cartridges can be stored for approx. 3 months provided they are tightly closed.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Transparent | 8118 | cartridge | 24x310 ml |
60 cardboards
|
|
| White 9010 | 8117 | cartridge | 24x310 ml |
60 cardboards
|
|
The rapid hardening and the excellent adhesion make it suitable for sealing and static gluing of glass elements in the various glass applications: windows, glazing, glass bricks, profiled glass, artistic objects, solar panels and joints in bathrooms (tubs, shower booths, wash basins), SPA environments and pools. It is also suitable for elastic sealing of the connections between door and window fittings and facades for protection of seal gaskets in automobiles. It is indicated for sealing hatches and covering equipment on boats, caravans and camper vans. It is also used on domestic appliances. It is not compatible with porous or alkaline surfaces such as marble, concrete, fibre cement or cement lime mortar, as the acetic acid released during vulcanisation might attack them. The contact with metals such as copper, zinc, lead or brass leads to their corrosion.
| PARAMETER AND TEST METHOD | VALUE |
| Density (ISO 1183-1) | 1,04 g/ml |
| Application temperature | From +5 °C to +40 °C |
| Skin-over time (MIT 33*) | 15 minutes |
| Hardening rate from the outside to the inside at 23 °C (MT 32*) | 2,4 mm in 24h |
| Operating temperature | from -30 °C to +150 °C |
| Surface hardness (ISO 868) | Shore A: max = 30 / 15” = 20 |
| Volume variation (EN ISO 10563) | 6% |
| Creep resistance (EN ISO 7390) | 0,0 mm |
| Elongation at break (DIN 53504 – Punch S3) | 1000% |
| Tensile strength at break (DIN 53504 – Punch S3) | 1,6 N/mm² |
| Modulus of elasticity at 100% (DIN 53504 – Punch S3) | 0,4 N/mm² |
| Stretching to breaking point (EN ISO 8339/A – G/A)l | 170% |
| Tensile strength at break (EN ISO 8339/A – G/Al) | 0,8 N/mm² |
| Modulus of elasticity at 100% (EN ISO 8339/A – G/Al) | 0,6 N/mm² |
| Elastic recovery (EN ISO 7389/B – G/Al) | > 95% |
| Maximum operating elongation (ISO 11600) | 25% |
| Resistance to acid | excellent |
| Resistance to bases | excellent |
| Odour after skin-over | none |
* Torggler Internal Methods (MIT) are available on request.
| COVERAGE GUIDE TABLE | ||
| JOINT WIDTH X DEPTH (MM) | QUANTITY USED PER LINEAR METRE | LINEAR METRES COVERED WITH ONE CARTRIDGE |
| 6×6 | 36 ml | 8,7 |
| 8×8 | 64 ml | 4,9 |
| 10×10 | 100 ml | 3,1 |
| 15×10 | 150 ml | 2,1 |
| 20×10 | 200 ml | 1,5 |
Still missing information?
Contact our team for personalized support and product guidance.