Swimming pool
Tile coating expansion jointfor swimming pools are subject to a very high level of stress and have to fulfil increasingly high aesthetic requirements. Detailed planning and careful execution, combined with the use of products tested and certified for this specific application, are therefore essential prerequisites for long-lasting functionality.
1
2
3
4
4
5
6
7
8
9
10
11
1. Pretreatment
Multigrip
Multigrip is a single component, adhesion promoting primer, based on a styrene-acrylic resin water based emulsion and selected aggregates.
2. Screed
Fast Screed
Pre-mixed, fast setting and hardening cementitious mortar class CT C30 F6 according to EN 13813, for floating or adherent screeds. For internal and external use.
3. Wall levelling
Multimix Evo
Quick-setting pre-mixed and fibre-reinforced mortar for restoration, renovation and levelling work both on façades and floors in thickness from 3 to 50 mm. Good adhesion and excellent workability. For manual and machine applications.
4. Waterproofing tapes
PP Tape 120 mm – 50 m
Polypropylene reinforcement tape with side perforations
Corner Tissue 90°
Reinforcement tissue for closed corners.
5. First coat of waterproofing
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
6. Reinforcement net
Rete SSA
160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.
Net EKOR A150
EKOR A150 is an alkali-resistant reinforcing mesh for thermal insulation systems, coatings and the Wall Remedy System.
7. Second coat of waterproofing
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
8. Tile adhesive
Tile 480
One-component, improved, high strength, cementitious adhesive, with long open time, deformable, class C2 TE S1 in compliance with EN 12004. For indoor and outdoor use on walls and floors, even for overlaying, for porcelain and glazed stoneware and ceramic tiles of all types and sizes. Frost resistant.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
9. Grout
Tile Grout 2-15 mm
Cement based powder grout, single component, fl exible and waterproof, classifi ed as CG2 WA in compliance with EN 13888, for fi lling joints 2 to 15 mm wide.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
10. Expansion joint
Acetic Professional
Acetic curing silicone sealant, resistant to moulds for door and window frames and sanitary use.
Primer Silicone
Pre-spreading for silicone sealants, siloxane resin in solvent-based, for priming the sides of joints subject to high stress and/or where adhesion may be difficult.
11. Expansion joint on pool edges
Marble & Stone
Neutral curing silicone sealant with low modulus of elasticity for marble and natural stone.
Domus
Neutral curing silicone sealant with anti-mould agent and low modulus of elasticity.
Acetic Standard
Acetic curing silicone sealant with anti-mould agent for sanitary use and facades.
