Marble & Stone
Neutral silicone sealant with low elastic modulus, for use on marble and natural stone.
Neutral silicone sealant with low elastic modulus, for use on marble and natural stone.
- Anti-halo: does not stain high-quality, absorbent media
- High UV resistance
- Ideal for both indoor and outdoor use
- Elastic elongation from -50 °C to +150 °C
- Meko-free formulation
Variations
Choose the perfect solution for your project
Transparent
White 9010
Application areas
Choose Marble & Stone for
- Sealing on marble, natural stone and delicate, absorbent substrates;
- Sealing of connection and expansion joints (both external and internal) in the construction, marine and general industrial sectors;
- Waterproof and mould-resistant sealing of connection joints in sanitary areas (bathrooms, baths, shower cubicles, washbasins, spas and swimming pools);
- Sealing joints between glass and window/door frames (metal, pre-painted, timber or PVC);
Application areas
Where Marble & Stone performs best
Discover more
Other solutions you might be interested in
Details
Marble & Stone It is a neutral, low-modulus silicone sealant formulated for use on marble and natural stone, as it prevents the formation of unsightly marks caused by the organic plasticisers contained in conventional silicone sealants. Thanks to its exceptional resistance to UV rays, weathering and ageing, its excellent adhesive properties and the high elasticity resulting from its low elastic modulus, Marble & Stone can be advantageously used as a joint sealant both indoors and outdoors in any setting. It is also used in glazing and healthcare settings as it is mould-resistant. During curing, no acidic or basic substances are produced that could corrode metal substrates. Marble & Stone is classified as a non-structural sealant for façade elements (F-EXT/INT in accordance with EN 15651-1), for glazing (G according to EN 15651-2) and for healthcare applications (XS1 according to EN 15651-3). The product is certified as EC1 by GEV for its very low emissions of volatile organic compounds.
Instructions for use
Joint dimensions:
Minimum width = 6 mm.
For widths up to 10 mm, the depth must be equal to the width of the joint and, in any case, not less than 6 mm.
For widths between 10 and 20 mm, the depth must be at least 10 mm.
For widths exceeding 20 mm, the depth must be half the width.
- The sides of the joint must be clean, degreased and dry. For porous substrates, it is recommended to treat them beforehand with SILICONE PRIMER. Deep expansion joints must be properly filled with suitable pre-formed fillers, such as Torggler Filling Cord.
- Apply adhesive tape along the sides of the joint.
- Insert the cartridge into the appropriate gun, open it, screw on the nozzle and cut the tip to ensure a sufficient opening.
- Inject the sealant generously.
- Smooth with a spatula moistened with SMOOTH within 5 minutes of application, applying firm pressure to eliminate air pockets.
- Remove the adhesive tape immediately after smoothing.
Cleaning tools
While the sealant is still pliable, use solvents; once hardened, clean only mechanically.
Storage
When kept in its original, unopened packaging and stored in a cool, dry place, the product will remain in good condition for a period of at least 12 months. Partially used cartridges can be stored for around 3 months if kept tightly sealed.
Warnings
Marble & Stone It is not suitable for structural bonding.
Marble & Stone does not adhere to Teflon, polyethylene or polypropylene, nor to damp surfaces.
Marble & Stone cannot be painted over.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Transparent | 5602 | cartridge | 12x310 ml |
104 cardboards
|
|
| White 9010 | 5599 | cartridge | 12x310 ml |
104 cardboards
|
|
Marble & Stone It is ideal for:
- Sealing on marble, natural stone and delicate, absorbent substrates;
- Sealing of connection and expansion joints (both external and internal) in the construction, marine and general industrial sectors;
- Waterproof and mould-resistant sealing of connection joints in sanitary areas (bathrooms, baths, shower cubicles, washbasins, spas and swimming pools);
- Sealing joints between glass and window/door frames (metal, pre-painted, timber or PVC);
| PARAMETER AND TEST METHOD VALUE | VALUE |
| Density (ISO 1183-1) | 1.02 g/ml |
| Application temperature | from +5 °C to +40 °C |
| Surface curing time (MIT 33*) | approx. 20 minutes |
| Curing rate from the outside inwards at 23 °C (MIT 32*) | approx. 2.4 mm in 24 hours |
| Operating temperature | –30 °C to +150 °C |
| Surface hardness (ISO 868) | Shore A: max = 25 / 15’’ = 18 |
| Elongation at break (S3 die) (DIN 53504) | approx. 700% |
| Modulus of elasticity at 100% (S3 die) (DIN 53504) | approx. 0.4 N/mm² |
| Tensile breaking load (Die S3) (DIN 53504) | approx. 1.00 N/mm² |
| Elongation at break (EN ISO 8339/A) | 130% |
| Modulus of elasticity at 100% (EN ISO 8339/A) | 0.35 N/mm² |
| Tensile breaking load (EN ISO 8339/A) | 0.4 N/mm² |
| Elastic recovery (EN ISO 7389/B) | > 90% |
| Creep resistance (EN ISO 7390) | 0.0 mm |
| Maximum working elongation (ISO 11600) | 25% |
| Acid resistance | excellent |
| Resistance to alkalis | excellent |
| Odour after cross-linking | none |
* Torggler’s in-house methods are available on request.
| JOINT WIDTH X DEPTH (MM) | CONSUMPTION PER LINEAR METRE | LINEAR METRES PRODUCED WITH ONE CARTRIDGE |
| 6×6 | 36 ml | 8.7 |
| 8×8 | 64 ml | 4.9 |
| 10×10 | 100 ml | 3.1 |
| 15×10 | 150 ml | 2.1 |
| 20×10 | 200 ml | 1.6 |
| 30 × 15 | 450 ml | 0.7 |
Still missing information?
Contact our team for personalized support and product guidance.