Bathroom with moderate exposure to humidity: Flexible mortar
Bathrooms without shower tray classified as W2-I or W3-I according to DIN 18534 are increasingly in vogue, both in existing buildings and in new constructions, so that they dictate the new design standard for contemporary bathrooms. This applies in particular to public showers in sports facilities or workplaces. Owners generally want the floor tiling to continue into the shower area. With this solution, water is drained exclusively through the tiles and therefore the underlying waterproofing layer, which can be created with a flexible mineral mortar, is of high importance.
1
2
3
4
5
6
6
6
7
8
9
10
11
1. Pretreatment
Tile Primer
A pre-treatment designed to improve adhesion, absorption and insulation for the installation of tiles on gypsum, anhydrite and cement-based substrates.
2. Screed
Fast Screed
Pre-mixed cementitious mortar with semi-rapid setting and drying, class CT C25 F4 according to EN 13813, for the construction of bonded, self-supporting, floating and heated screeds, both indoors and outdoors.
Livellina HS
Self-levelling cementitious screed, specifically designed for underfloor heating systems bonded to the substrate, for levelling cementitious screeds and substrates, for thicknesses ranging from 5 to 40 mm.
3. Wall levelling
Multimix Evo
A ready-mixed, fibre-reinforced, fast-setting mortar for restoration, repair and levelling work on both façades and floors, in thicknesses ranging from 3 to 50 mm. Good adhesion and excellent workability. Suitable for both manual and machine application.
4. Wall levelling with heating system
R.E.D.
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from 3 to 40 mm. Skim plaster for façade renovation with very high adhesion power and excellent workability, type GP CSII Wc0, according to EN 998-1, for restoration and levelling work, for thickness from 3 to 40 mm. For manual and machine applications.
5. First coat with waterproofing mortar
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
Flexistar
Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
6. Waterproofing tapes
PP Tape
Polypropylene reinforcement tape with side perforations.
Corner Tissue 90°
Reinforcement tissue for closed corners.
Flex Pipe Collar 22 – 37
Pipe collar with flexible reinforcement.
Flex Pipe Collar 93 – 146
Pipe collar with flexible reinforcement.
7. Second coat with waterproofing mortar
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
Flexistar
Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
8. Tile adhesive
Tile 480
Improved, single-component, high-strength, powder-based cementitious adhesive with extended open time and deformability, class C2 TE S1, in accordance with EN 12004. Suitable for bonding, both indoors and outdoors, on walls and floors, including over existing tiles, of porcelain stoneware, glazed tiles and all types of ceramic tiles (except thin slabs) and sizes (longest side up to 120 cm). Frost-resistant.
Tile 250
Improved, single-component, low-slump, powder-based cementitious adhesive with extended open time, made flexible, class C2 TE in accordance with EN 12004. Suitable for bonding medium-sized porcelain and glazed tiles indoors and outdoors, on walls and floors. Frost-resistant.
9. Grout
Tile Grout 2-15 mm
Cement based powder grout, single component, fl exible and waterproof, classifi ed as CG2 WA in compliance with EN 13888, for fi lling joints 2 to 15 mm wide.
Tile Epoxy
Two-component epoxy mortar, class R2 T in accordance with EN 12004 and RG in accordance with EN 13888, for bonding and grouting ceramic tiles, ceramic and glass mosaics, marble and natural stone up to a thickness of 15 mm.
10. Connection joint
Domus
A neutral, mould-resistant silicone sealant with a low modulus of elasticity.
Acetic Standard
Acetic silicone sealant, mould-resistant, for use on façades and glazing, indoors and outdoors, and in sanitary applications. Ideal for ceramic tiles.
Marble & Stone
Neutral silicone sealant with low elastic modulus, for use on marble and natural stone.
11. Bonding shower enclosures
Hybrid HM
Single-component, hybrid polymer-based adhesive-sealant with anti mould agent for overpaintable elastic bonding and sealing of joints in construction and industry in general.