Flex Pipe Collar 93 – 146
Pipe collar with flexible reinforcement.
Pipe collar with flexible reinforcement.
- For indoor and outdoor use
- For walls and floors
- For wet areas with non-pressurised water, such as showers or bathrooms, in residential buildings, hotels, care homes and hospitals. For permanently wet areas with pressurised water, such as swimming pools and baths. For water exposure classes W0-I, W1-I, W2-I, W3-I in accordance with DIN 18534; DIN 18531-5 (balconies, terraces, etc.); DIN 18535 (swimming pools and tanks) with a test certificate from MPA Braunschweig
Application areas
Where Flex Pipe Collar 93 – 146 performs best
Discover more
Other solutions you might be interested in
Details
Pipe clamp for through-pipes with flexible reinforcement.
Instructions for use
Before fitting the Flex Pipe Collars, ensure that the collar you have chosen is the correct diameter and seals the pipe perfectly with its flexible centre section. Position the 22–37, 50–75 or 93–146 pipe collar onto the pipe connection protruding from the wall and bond it using a waterproofing compound such as Aquatech. Flex 2k or Flexistar. The Flex Pipe Collar must be laid onto the fresh adhesive and pressed down evenly, from the centre outwards towards the edges, to prevent air bubbles from forming beneath the waterproofing membrane.
Storage
Flex Pipe Collar has no expiry date, but to preserve its integrity and performance characteristics, it should be stored in a cool, dry and sheltered place. However, it is recommended that it be used within 24 months of purchase.
| Code | Detail | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| 15213 * | 93-146 mm | cardboard | 25 piece |
250 pieces
|
|
| PRODUCT | FLEX PIPE COLLAR 93-146 |
| Description: | A pipe collar coated with non-woven polypropylene fabric on both sides, with a flexible central section. |
| Material composition: | Base material: PP Coating: weather-resistant thermoplastic elastomer |
| Total thickness (approx): | 0.66 mm |
| Pipe diameter | 93–146 mm |
| External dimensions | 250 x 250 mm |
| Flexible centre section diameter | 150 mm |
| Hole diameter | 65 mm |
| PHYSICAL PROPERTIES | |
| Burst pressure | > 1.5 bar |
| Water pressure resistance DIN EN 1928 | > 1.5 bar |
| Lateral breaking load DIN 527-3 | 25 N / 15 mm |
| CHEMICAL PROPERTIES: Resistance after 7 days’ immersion in the following chemicals at room temperature |
|
| 3% hydrochloric acid | resistant |
| 35% sulphuric acid | resistant |
| Citric acid 100 g/l | resistant |
| 5% lactic acid | resistant |
| 3% / 20% potassium hydroxide | resistant |
| Sodium hypochlorite 0.3 g/l | resistant |
| Salt water (20 g/l seawater) | resistant |
Still missing information?
Contact our team for personalized support and product guidance.