Tile Primer
A pre-treatment designed to improve adhesion, absorption and insulation for the installation of tiles on gypsum, anhydrite and cement-based substrates.
A pre-treatment designed to improve adhesion, absorption and insulation for the installation of tiles on gypsum, anhydrite and cement-based substrates.
Application areas
Discover more
Tile Primer is an acrylic-based pre-treatment in aqueous dispersion which, once applied and dried, forms a coloured, hard film with high water resistance. Tile Primer improves the adhesion of skim coats and levelling compounds by regulating absorption on cementitious, anhydrite-based or gypsum surfaces.
The substrate must be clean and dry. Shake the product well before use. Depending on the type of substrate, the product can be diluted with water (see table below). Tile Primer can be applied with a flat brush, a wide-bristle brush or by spraying. Application must take place at temperatures above +5 °C and, for outdoor work, must not be carried out when rain is imminent. One coat is usually sufficient. In the case of highly absorbent substrates, repeat the treatment a second time. Once the applied film no longer feels sticky to the touch, you may proceed to apply the tile adhesive or lay Floorrep self-levelling mortar or a Livellina 0-10 cement-based levelling compound, Livellina 5-30 and Livellina HS. Clean tools with water whilst the Tile Primer is still fresh. Dried residues must be removed with nitro solvent.
Tile Primer is sensitive to frost. Store at temperatures above +5 °C. It remains stable for at least 18 months when kept in its original, unopened packaging.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Bright red | 5741 | canister | 25kg |
28 canisters
|
|
| Bright red | 5520 | canister | 5kg |
128 pieces
|
Tile Primer can be used:
| Appearance | Red liquid |
| Density | approx. 1.01 kg/l |
| pH (MIT 02)* | 7–8 |
| Dry residue | approx. 18.5% |
| Ash content | approx. 0.01% |
| Application temperature | >+5 °C |
| Drying time | 1 hour |
| Heat resistance of the cured film | up to +80 °C |
* Torggler Internal Methods (MIT) are available on request.
The coverage of Tile Primer is approx. 80–200 g/m² (see table).
| Substrate | Tile Primer coverage | Mixing ratio |
| Plaster, anhydrite, screeds with old adhesive residues | approx. 80 to 150 ml/m² | Undiluted |
| Absorbent mineral substrates, concrete, cement screeds, lime/cement plasters, aerated concrete blocks, plasterboard. | 1st coat approx. 100 to 200 ml/m² 2nd coat approx. 50 to 70 ml/m² |
Diluted 1:1 with water Diluted 1:1 with water |
| On highly absorbent substrates or before hanging wallpaper | in several coats | Diluted 1:2 with water |
Contact our team for personalized support and product guidance.