Terrace and flat roof
About 80% of building damage is due to inadequate waterproofing. Reliable protection against water infiltration can be achieved with less than 5% of the investment. Waterproofing not only protects the building, but also the investment. That is why planning, quality processing and the choice of the suitable waterproofing system is so important.
1
2
3
4
5
5
6
7
8
1. Waterproofer
BW 200
Multi-function bituminous waterproofer.
Black Hydro Easy
Multi-purpose, thixotropic, liquid bituminous waterproofing compound for surface protection systems for concrete, classified as Type C in accordance with UNI EN 1504-2, principles PI, MC and IR.
2. Screed
3. Primer
Tile Primer
A pre-treatment designed to improve adhesion, absorption and insulation for the installation of tiles on gypsum, anhydrite and cement-based substrates.
4. Waterproofer
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
Flex 1K
Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.
Flexistar
Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
5. Sealing tape
PP Tape
Polypropylene reinforcement tape with side perforations.
Corner Tissue 90°
Reinforcement tissue for closed corners.
Corner Tissue 270°
Reinforcement tissue for open corners.
6. Flexible adhesive
Tile 480
Improved, single-component, high-strength, powder-based cementitious adhesive with extended open time and deformability, class C2 TE S1, in accordance with EN 12004. Suitable for bonding, both indoors and outdoors, on walls and floors, including over existing tiles, of porcelain stoneware, glazed tiles and all types of ceramic tiles (except thin slabs) and sizes (longest side up to 120 cm). Frost-resistant.
Tile 250
Improved, single-component, low-slump, powder-based cementitious adhesive with extended open time, made flexible, class C2 TE in accordance with EN 12004. Suitable for bonding medium-sized porcelain and glazed tiles indoors and outdoors, on walls and floors. Frost-resistant.
7. Grout
Tile Grout ≤8 mm
Cement-based powder grout, classified as CG2 WA in compliance with EN 13888, for rigid filling of joints up to 8 mm.
Tile Grout 5-15 mm
Cement-based powder grout, classified as CG2 to UNI EN 13888, for filling joints 5 to 15 mm wide.
8. Sealant
Domus
A neutral, mould-resistant silicone sealant with a low modulus of elasticity.
Acetic Standard
Acetic silicone sealant, mould-resistant, for use on façades and glazing, indoors and outdoors, and in sanitary applications. Ideal for ceramic tiles.
