BU Tape
Butyl reinforcement tape.
Butyl reinforcement tape.
- Self-adhesive
- Easy peel
- Solvent free
- Heat stable
- For flexible joint sealing in a tile and plate system – suitable for water exposure classes W0-W2 according to DIN 18534
Application areas
Choose BU Tape for
- high adhesive power
- great heat stability
- excellent adhesion at low temperatures
- excellent manoeuvrability, plasticity and deformability
Application areas
Where BU Tape performs best
Discover more
Other solutions you might be interested in
Waterblock
Ready-to-use, non-silicone, ready-to-use, mineral solvent-based, breathable, colourless liquid waterproofing agent…
Ready-to-use, non-silicone, ready-to-use, mineral solvent-based, breathable, colourless liquid waterproofing agent for pedestrian floors, specifically for ceramic, stoneware, klinker, terracotta and wood floors.
Flex PU Catalyser
Accelerating additive used with Flex PU liquid polyurethane waterproofing membrane.
Accelerating additive used with Flex PU liquid polyurethane waterproofing membrane.
Flex PU
Liquid polyurethane membrane with high permanent elasticity, used for long-lasting…
Liquid polyurethane membrane with high permanent elasticity, used for long-lasting waterproofing based on pure hydrophobic elastomeric polyurethane resins, which provide excellent mechanical, chemical, thermal, UV and natural resistance.
Flex PU Primer 2K
Water-based, rigid and transparent epoxy primer. Used as a primer…
Water-based, rigid and transparent epoxy primer. Used as a primer in waterproofing, sealing and floor coating applications on non-absorbent surfaces.
Flex PU Detail
Liquid, permanently elastic, thixotropic, fibre-reinforced polyurethane membrane for complex spots…
Liquid, permanently elastic, thixotropic, fibre-reinforced polyurethane membrane for complex spots and details.
Flex PU Drive
Polyurethane, pigmented, abrasion-resistant, semi-rigid, colour-stable and UV-resistant coating used as…
Polyurethane, pigmented, abrasion-resistant, semi-rigid, colour-stable and UV-resistant coating used as finishing for the protection of exposed waterproofing coatings subject to high abrasion conditions, particularly suitable for public areas and driveways.
Flex PU Walk
Polyurethane, pigmented, UV-resistant, colour-stable coating with high permanent elasticity, used…
Polyurethane, pigmented, UV-resistant, colour-stable coating with high permanent elasticity, used as a top coat for protecting exposed polyurethane waterproofing coatings. Particularly suitable for pedestrian areas.
Geotex
Non-woven polyester geotextile (60 g/m2) used as reinforcement in conjunction…
Non-woven polyester geotextile (60 g/m2) used as reinforcement in conjunction with Flex PU liquid waterproofing membranes.
Flex PU Primer
A solvent-based, transparent, rigid, deep-penetrating, fast-drying polyurethane primer.
A solvent-based, transparent, rigid, deep-penetrating, fast-drying polyurethane primer.
Black Hydro Tex
Flexistar Rapid
Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast…
Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast hardening.
Aquatech® Rapid
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for…
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for exterior and interior waterproofing.
Details
BU Tape is a self-adhesive reinforcement tape with 100 mm height and 15 m length, consisting of a butyl rubber compound coated on a polypropylene coat, designed to have an effective adhesion on materials such as marble, plasterboard and concrete and to provide a finished, rough and absorbent surface. BU Tape is “easy peel”, i.e. the edges of the silicone film present exceed the width of the adhesive by a few millimetres, facilitating the peeling operation. Thanks to its manoeuvrability, plasticity and deformability, it can be used even in tight and difficult to reach spaces. BU Tape is compatible with Torggler cementitious waterproofers such as Flex 1K, Flex 2K and Flexistar and the Aquatech liquid waterproofing sheath. BU Tape is certified as EC 1 Plus in terms of very low emissions of volatile organic compounds.
Instructions for use
Preparation for use
The surfaces to be treated must be clean, degreased, in good condition and free from impurities.
Instructions for application
Unroll the product in the desired length by calculating the minimum overlap to the corner reinforcement fabric of 5 cm. Remove the silicon protective film and position the tape by pressing with a roller or cloth swab. Then bury BU Tape in the cementitious waterproofing agent or in the liquid waterproofing sheath indicated.
Storage
BU Tape must be stored in a dry, sheltered place, away from direct sunlight, at a temperature between +5 °C and +40 °C. The performance characteristics of the product remain unchanged for a very long period. However, use within 24 months from the purchase is recommended.
Warnings
- Store the product at temperatures between +5 °C and +40 °C. Temperatures above +28 °C can already cause difficulties in peeling off the protective film.
- Protect from exposure to UV rays.
| Code | Dimensions | Packaging | Packaging size | Barcode |
|---|---|---|---|---|
| 15600 | 100 mm | roll | 20 m |
|
BU Tape is used as a self-adhesive butyl sealing tape to seal the connection angle between the floor slab and wall, both in brick and plasterboard. Suitable for water exposure classes W0-W2 according to DIN 18534.
BU Tape guarantees:
- high adhesive power
- great heat stability
- excellent adhesion at low temperatures
- excellent manoeuvrability, plasticity and deformability
| Appearance | Grey self-adhesive tape |
| Dimensions | height: 10 cm, length 15 m |
| Thickness | 0.77 mm |
| Temperature resistance (min. / max.) | -30 °C / +60 °C |
| Longitudinal tensile strength (DIN 527-3) | 30 N / 15 mm |
| Lateral tensile strength (DIN 527-3) | 19 N / 15 mm |
| Longitudinal extension at break (DIN 527-3) | 60% |
| Lateral extension at break (DIN 527-3) | 80% |
| Water pressure resistance (DIN EN 1928) | ≥ 0.2 bar |
| Peeling on neutral PVC substrate | ≥ 13 N / 20mm |
| Burst pressure | 0.4 bars |
| Chemical resistance | Resistant to many chemical liquids |
Still missing information?
Contact our team for personalized support and product guidance.