Waterproofing

A single-component, silanised polyurethane-based waterproof adhesive that is elastic and can be applied with a trowel. Used for bonding and waterproofing the overlaps of the sheets in the Evaproof range.

A three-component, thixotropic epoxy-cementitious mortar, suitable for protecting and levelling both vertical and horizontal surfaces exposed to moisture and requiring good chemical resistance and high abrasion resistance.

Rasoepoxy It is a two-component epoxy system, consisting of epoxy resins. It is designed to cure even on damp surfaces, both indoors and outdoors, forming a compact, waterproof layer with high abrasion resistance. It is suitable for subsequent coating with epoxy or polyurethane finishes, or with waterproofing products from the Polyurea range.

PVC drain with vertical outlet, fitted with a square-shaped waterproof membrane flange (50 cm x 50 cm). The drain, available in various diameters (Ø75, Ø90 or Ø110 mm), is compatible with Evaproof waterproof membrane systems.

Thermoformed waterproofing element for sealing external/internal corners. It is used in conjunction with Evaproof Band, and Evaproof Adhesive (a polyurethane adhesive) must be used for its installation.

A flexible, waterproof polyolefin elastic tape produced by extrusion, used in conjunction with Evaproof Adhesive polyurethane adhesive to ensure a continuous waterproofing seal in Evaproof membrane systems and for the treatment of vertical upstands.

A flexible, multi-layered, waterproof polyolefin membrane, designed to prevent cracking and separate structures, manufactured by extrusion, with a thickness of 1.25 mm and a weight of 525 g/m^², coated on both sides with polyester/polypropylene fibre fabric to ensure better adhesion to the cementitious adhesive.

Epoxy resin for the pre-treatment of absorbent surfaces prior to the application of epoxy or polyurethane resins, or waterproofing products from the Polyurea range. It can be used as a primer or for the creation of quartz-filled epoxy screeds, as it complies with the requirements of standard EN 13813.

Prefabricated, dimensionally stable corners made of coated polypropylene non-woven fabric, transversally extensible and longitudinally stable.

Sealing tape made from coated, transversely stretchable and longitudinally stable polypropylene non-woven fabric, 120 mm.

Non-woven polyester geotextile (60 g/m²) used as reinforcement in conjunction with Flex PU liquid waterproofing membranes.

Non-woven fabric made from polyester staple fibre reinforced with glass fibre filaments.

Armouring and reinforcement of liquid waterproofing products for external and internal applications.

Cut-resistant tape.  

Butyl reinforcement tape.

Self-adhesive shower/bathtub connection tape.

Collar for through-hose with flexible reinforcement.

Collar for through-hose with flexible reinforcement.

Collar for through-hose with flexible reinforcement.

Self-adhesive butyl collar for floor drains.

Sealing membrane for secure surface sealing in composite structures.

Sealing tape for watertight corner and connection joints 140 mm.

Reinforcement tissue for open corners.

Reinforcement tissue for closed corners.

Fibreglass sealing and decoupling strip.

Polypropylene reinforcement tape with side perforations.