Barriera al vapore interna
Barriera al vapore interna, a membrane for sealing joints in the professional installation of windows and doors.
Barriera al vapore interna, a membrane for sealing joints in the professional installation of windows and doors.
Application areas
Where Barriera al vapore interna performs best
Discover more
Other solutions you might be interested in
Guaina EPDM
EPDM membrane for perimeter sealing of buildings or waterproofing of…
EPDM membrane for perimeter sealing of buildings or waterproofing of roofs and joints.
Membrane DUO
Variable SD sealing membrane suitable for the construction of both…
Variable SD sealing membrane suitable for the construction of both internal and external sealing nodes. The fully self-adhesive side makes installation extremely quick and easy.
PCV tape
Compression deformable PVC 4th side sealing tape to seal and…
Compression deformable PVC 4th side sealing tape to seal and adapt to frame cavities.
Butyl tape with alufoil
Butyl tape with aluminium foil for hermetic seals.
Butyl tape with aluminium foil for hermetic seals.
Butyl tape grey
Adhesive butyl sealing tape for airtight joints on the 4th…
Adhesive butyl sealing tape for airtight joints on the 4th side of the window.
EPDM membrane with butyl
EPDM membrane and perimeter seal for curtain walling/ventilated facades and…
EPDM membrane and perimeter seal for curtain walling/ventilated facades and window frames.
Self-expanding joint sealing tape EXP BG2
Joint tape BG2 (300 Pa) is self-expanding pre-compressed sealing tape…
Joint tape BG2 (300 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.
Aquatech® Rapid
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for…
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for exterior and interior waterproofing.
Plaster stop profile
End profile with mesh for perfect closure of façade coatings.…
End profile with mesh for perfect closure of façade coatings. It can be used on ETICS or reinforced skim coats up to 3 or 6 mm.
Standard window connection profile
PVC adhesive profile with fibreglass mesh for connecting windows, doors…
PVC adhesive profile with fibreglass mesh for connecting windows, doors and similar elements.
Window connection profile 3D-PRO
Heavy-duty rainproof profile for plaster connections to windows, doors and…
Heavy-duty rainproof profile for plaster connections to windows, doors and similar construction elements with stress-relieving function in three 3D dimensions, protective lip and expanding seal.
PE tape
Single-sided adhesive, closed-cell PE sealing tape for the use on…
Single-sided adhesive, closed-cell PE sealing tape for the use on the underside of windows and doors. Maintains impermeability to water even in the presence of backwater.
Details
Membrane – Barriera al vapore interna – an adhesive-backed membrane for the professional installation of subframes and windows and doors, consisting of a high-performance polymer tape made from a fabric that is impermeable to water vapour (from the inside out); it can be plastered over and painted. The UV-resistant fabric is coated with an acrylic adhesive which facilitates adhesion and installation thanks to its low thickness. Applied at the junction between the wall and the subframe or window/door frame, it ensures a tight seal thanks to its high elongation capacity, accommodating the movements of the connected parts.
Certified in accordance with DIN 4108-7, EnEV and RAL.
Warnings
This data sheet provides recommendations without any obligation or guarantee. The application instructions given here must be adapted to the specific site conditions and type of substrate. The user is required to carry out their own tests to verify the suitability and feasibility of application in order to avoid defects for which we accept no liability.
| Code | Detail | Dimensions | Packaging | Packaging size | Barcode |
|---|---|---|---|---|---|
| 15262 * | Inside | 100 mm | roll |
|
|
| 15606 | Inside | 50 mm | roll |
|
| TEST PARAMETER AND METHOD | VALUE |
| Total width (Internal) | 70 /100 /150 mm |
| Coating width (Internal) | 20 mm / full surface |
| Total thickness (Internal) | 0.42 mm (no adhesive) |
| Material weight (Internal) | 140 g/m² (no adhesive) |
| Length per roll (Internal) | 25 metres |
| Longitudinal breaking load (DIN EN ISO 527-3) | 45 N / 15 mm |
| Lateral breaking load (DIN EN ISO 527-3) | 29 N / 15 mm |
| Longitudinal elongation at break (DIN EN ISO 527-3) | 144 % |
| Lateral elongation at break (DIN EN ISO 527-3) | 235 % |
| Sd-value (DIN EN ISO 1931) | ≥ 40 m |
| Driving rain resistance (DIN EN 1027) | ≥ 600 Pa |
| Air permeability (DIN EN 12114) | a < 0.1 m³ |
| Fire classification (DIN EN 13501) | E |
| Peeling test on neutral PVC carrier “immediately” (Internal) |
≥ 31 N / 20 mm |
| Peeling test on neutral PVC carrier after 24 hours (Internal) |
≥ 33 N / 20 mm |
Still missing information?
Contact our team for personalized support and product guidance.