Marble & Stone

Neutral curing silicone sealant with low modulus of elasticity for marble and natural stone.

Neutral curing silicone sealant with low modulus of elasticity for marble and natural stone.

  • Does not stain absorbent substrates
  • High UV resistance
  • Ideal for outdoor and indoor applications
  • Elastic elongation from -50 °C to +150 °C
  • Meko free formulation

Variations

Choose the perfect solution for your project

 
Transparent
 
White 9003

Application areas

Choose Marble & Stone for

Sealing marble, natural stone and delicate, absorbent surfaces;
Sealing connection and expansion joints (external and internal) in construction, boating and industry in general;
waterproof and mould-resistant sealing of connection joints in sanitary environments (bathrooms, bathtubs, shower enclosures, sinks, spas and swimming pools);
sealing of joints between glass and window frames (metal, pre-painted, wood or PVC);

Application areas

Where Marble & Stone performs best

Discover more

Other solutions you might be interested in

Details

Marble & Stone is a neutral silicone sealant with low elastic modulus formulated for applications on marble and natural stone, as it prevents the appearance of unsightly streaks caused by the organic plasticisers contained in conventional silicone sealants. Thanks to its exceptional resistance to UV rays, atmospheric agents and ageing, its excellent adhesive properties and its high elasticity linked to its low elastic modulus, Marble & Stone can be used advantageously as a sealant for joints both indoors and outdoors in any context. It is also used in glazing and sanitary environments as it is resistant to mould. During polymerisation, no acidic or basic substances are developed that could affect metal substrates. Marble & Stone is classified as a non-structural sealant for façade elements (F-EXT/INT according to EN 15651-1), for glazing (G according to EN 15651-2) and for sanitary applications (XS1 according to EN 15651-3). The product is certified as EC1 by the GEV body in terms of very low emissions of volatile organic compounds.

Instructions for use

Joint dimensions:
Minimum width = 6 mm.
For widths up to 10 mm, the depth must be equal to the width of the joint and in any case not less than 6 mm.
For widths from 10 to 20 mm, the depth must be at least 10 mm.
For widths over 20 mm, the depth must be half the width.

The sides of the joint must be clean, degreased and dry. For porous substrates, it is advisable to treat them beforehand with SILICONE PRIMER. Deep expansion joints must be properly filled with suitable preformed products, such as Torggler Filling Cord.
Stretch adhesive tape along the sides of the joint.
Insert the cartridge into the appropriate gun, open it, screw on the nozzle and cut the tip to obtain a sufficient opening.
Inject the sealant generously.
Smooth with a spatula moistened with SMOOTH within 5 minutes of application, applying a certain amount of pressure to eliminate air pockets.
Remove the adhesive tape immediately after smoothing.

Tool cleaning
While the sealant is still plastic, use solvents; after hardening, only mechanical cleaning is possible.

Storage

In its original, unopened packaging and if stored in a cool, dry place, the product will remain unaltered for a period of not less than 12 months. Cartridges that are not completely used up can be stored for approximately 3 months if tightly closed.

Warnings

Marble & Stone is not suitable for structural bonding.
Marble & Stone does not adhere to Teflon, polyethylene and polypropylene, or to damp surfaces.
Marble & Stone cannot be painted over.

Color Code Packaging Packaging size Pallet Barcode
Transparent
5602 cartridge 12x310 ml
116 cardboards
Barcode 8030334056024
White 9003
5599 cartridge 12x310 ml
116 cardboards
Barcode 8030334055997

Marble & Stone is ideal for:

Sealing marble, natural stone and delicate, absorbent surfaces;
Sealing connection and expansion joints (external and internal) in construction, boating and industry in general;
waterproof and mould-resistant sealing of connection joints in sanitary environments (bathrooms, bathtubs, shower enclosures, sinks, spas and swimming pools);
sealing of joints between glass and window frames (metal, pre-painted, wood or PVC);

TEST PARAMETER AND METHOD VALUE VALUE
Density (ISO 1183-1) 1,02 g/ml
Application temperature from +5 °C to +40 °C
Surface cross-linking time (MIT 33*) approx. 20 minutes
Hardening speed from the outside to the inside at 23 °C (MIT 32*) approx. 2.4 mm in 24 hours
Operating temperature from -30 °C to +150 °C
Surface hardness (ISO 868) Shore A: max = 25 /15’’ = 18
Elongation at break (Die S3) (DIN 53504) approx. 700%
100% elastic modulus (S3 die) (DIN 53504) approx. 0,4 N/mm2
Breaking load for traction (Die S3) (DIN 53504) approx. 1,00 N/mm2
Elongation at break (EN ISO 8339/A) 130%
100% elastic modulus (EN ISO 8339/A) 0,35 N/mm2
Breaking load for traction (EN ISO 8339/A) 0,4 N/mm2
Elastic recovery (EN ISO 7389/B) > 90%
Shear strength (EN ISO 7390) 0,0 mm
Maximum working elongation (ISO 11600) 25%
Acid resistance excellent
Resistance to bases excellent
Odour after cross-linking none

* Torggler Internal Methods are available upon request.

JOINT WIDTH X DEPTH (MM) CONSUMPTION PER LINEAR METRE LINEAR METRES COVERED WITH ONE CARTRIDGE
6×6 36 ml 8,7
8×8 64 ml 4,9
10×10 100 ml 3,1
15×10 150 ml 2,1
20×10 200 ml 1,6
30×15 450 ml 0,7

Scheda Tecnica
Dichiarazione di prestazione

Still missing information?

Contact our team for personalized support and product guidance.