Adhesive for EPDM membrane
Excellent adhesion to materials such as acrylic glass, steel, stone, concrete, lightweight concrete, lead and wood.
Excellent adhesion to materials such as acrylic glass, steel, stone, concrete, lightweight concrete, lead and wood.
Discover more
Other solutions you might be interested in
Mirror
Neutral silicone adhesive for bonding mirrors.
Neutral silicone adhesive for bonding mirrors.
Sitol® Primer Glass
Primer formulated as a black pre-treatment for glass surfaces to…
Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.
Sitol® Deck Bonding LV
Low viscosity hybrid adhesive for bonding natural and synthetic teak…
Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Meta 45
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that…
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that enable the creation of vertical lines without dripping and medium curing time.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Sitol® Primer Deck Caulking
Primer for sealants on wooden and porous substrates.
Primer for sealants on wooden and porous substrates.
Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
Sitol® Deck Bonding
Hybrid polymer-based adhesive-sealant with extended open time for natural and…
Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Hybrid HM
Single-component, hybrid polymer-based adhesive-sealant with anti mould agent for overpaintable…
Single-component, hybrid polymer-based adhesive-sealant with anti mould agent for overpaintable elastic bonding and sealing of joints in construction and industry in general.
Details
High-viscosity adhesive for applying EPDM membranes to vertical and horizontal surfaces on façades. Excellent for joining extruded EPDM gaskets.
Instructions for use
Apply the sealant to the substrate, creating bonding lines with a cartridge extrusion gun, then, after one minute, apply the EPDM membrane and press down firmly with a manual roller. The distance between the strips must be at least 40 mm, depending on the thickness and weight of the membrane.
Storage
Store in the original unopened packaging at temperatures between 5°C and 30°C. Keep dry and away from direct sunlight until ready to use.
Shelf life is 9 months if stored under the conditions indicated above. Check the production date on each sausage. The product’s shelf life is reduced if stored at higher temperatures.Consumption see technical data sheet
Warnings
The minimum application temperature is at least 5°C. Flammable: avoid open flames or other sources of ignition. Do not smoke. Refer to the safety data sheet.
| Color | Code | Packaging | Packaging size | Barcode |
|---|---|---|---|---|
| Black | 8326 | foil bag | 12x600 ml |
|
Curtain walls, window frames, EPDM gasket jointsExcellent adhesion to materials such as acrylic glass, steel, stone, concrete, lightweight concrete, lead and wood.
The actual yield depends on the type of substrate, the application and the thickness of the membrane. For example, in the case of vertical application on wood:
For a 0.5 mm membrane, 50 g of paste per linear metre is required (9 mm wide and 5 mm thick bead).
For a 1.0 mm membrane, 100 g of paste per linear metre is required (14 mm wide and 11 mm thick bead)
After rolling, you should obtain a layer of adhesive 1 mm thick and 4 to 7 cm wide.
Still missing information?
Contact our team for personalized support and product guidance.