Breathe

Instructions for use

Dilution and preparation of the product with water

• Brush application: 40÷50% by volume
• Roller application: 30÷40% by volume.

The product does not guarantee ease of application and spreading if used ready to use.

Application tools

• Brush: synthetic bristles
• Roller: short pile/smooth pile

Application cycle – interior walls
Thoroughly clean the surface, fill any imperfections, sand and dust.
Ensure there are no mould problems:
if necessary, carry out a specific restoration cycle beforehand.
Apply one coat of suitably diluted water-based acrylic fixative.
After 4-6 hours, apply at least two coats of Breathe.

• Touch dry: max 0.5 hours
• Through dry: max 24 hours
• Recoatable: 5÷6 hours

Application conditions
Environmental and substrate conditions: the substrate must be dry, free of dust and grease.
Ambient temperature: min. +10 °C / max. +35 °C
Relative ambient humidity: < 75%
Substrate humidity: < 10% R.H.

Known incompatibilities
None. For any use other than that indicated in this technical data sheet, please contact our Technical Service.

Tool cleaning
With water.

Safety precautions
Keep the jar tightly closed and protected from frost.

• Safety information for users is contained in the relevant safety data sheet.
• Empty containers or containers with slight traces of dried product film must be disposed of in accordance with local regulations.

Warnings

• Start from the corner furthest from the light source in the room, applying the product from the top of the wall and working downwards.
• Close the tin immediately after use.
• Store the product in its original packaging at a temperature between +5 °C and +35 °C.
• If you need to reapply the product, we recommend using a short-pile roller with the product correctly diluted. Following these application conditions will ensure maximum colour uniformity.