Terrace and flat roof

About 80% of building damage is due to inadequate waterproofing. Reliable protection against water infiltration can be achieved with less than 5% of the investment. Waterproofing not only protects the building, but also the investment. That is why planning, quality processing and the choice of the suitable waterproofing system is so important.

1. Waterproofer

BW 200

Multi-function bituminous waterproofer.

Alternative solution

Black Hydro Easy

Multi-purpose, thixotropic, liquid bituminous waterproofing compound for surface protection systems for concrete, classified as Type C in accordance with UNI EN 1504-2, principles PI, MC and IR.

2. Screed

3. Primer

Tile Primer

Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.

4. Waterproofer

Flex 2K

Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.

Alternative solution

Flex 1K

Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.

Alternative solution

Flexistar

Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.

5. Sealing tape

PP Tape

Polypropylene reinforcement tape with side perforations

Corner Tissue 90°

Reinforcement tissue for closed corners.

Alternative solution

Corner Tissue 270°

Reinforcement tissue for open corners.

6. Flexible adhesive

Tile 480

One-component, improved, high strength, cementitious adhesive, with long open time, deformable, class C2 TE S1 in compliance with EN 12004. For indoor and outdoor use on walls and floors, even for overlaying, for porcelain and glazed stoneware and ceramic tiles of all types and sizes. Frost resistant.

Alternative solution

Tile 250

Improved, single-component, cementitious tile adhesive, type C2 TE according to EN 12004, antislip and flexible, for gluing porcelain or glazed tiles of medium size. Can be used indoors and outdoors, on walls and floors. Frost resistant.

7. Grout

Tile Grout ≤8 mm

Tile Grout ≤8 mm is a grout powder, based on high- strength cements, fine crystalline aggregates, selected pigments, and specific polymers and additives, available in a wide range of colours....