Tile Primer
Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.
Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.
- High insulating capacity
- Good adhesion
- Easy to apply
- Solvent free
- Dilutable with water
- Extends the open time of adhesives
- Prevents bubble formation
- Prevents shrinkage cracks
Application areas
Choose Tile Primer for
- for the treatment of gypsum substrates on which ceramic tiles are to be applied using cementitious adhesives. It protects the gypsum from humidity and insulates it from cement, preventing the known expansive reaction between cement and gypsum.
- as a consolidating pre-spreading for cement-based substrates that are crumbling or need pre-treatment, before spreading Floorrep self-levelling mortar or Levellina 0-10, Levellina 5-30 and Levellina 5-40 cementitious levelling mortar.
- as consolidation and waterproofing of cement surfaces.
- as pre-treatment of cementitious substrates such as screeds or plasters before the application of cementitious adhesives or levelling compounds
Application areas
Where Tile Primer performs best
Discover more
Other solutions you might be interested in
Tile Bond 2K
Two-component epoxy mortar, class R2 T according to EN 12004,…
Two-component epoxy mortar, class R2 T according to EN 12004, for bonding and grouting ceramic elements, ceramic and glass mosaic, marble and natural stone, indoors and outdoors, in wet and immersion environments.
Ultimate
Powdered, resin-bonded, flexibilised, high-performance, mould-resistant, water-repellent, fast-setting and hardening grout…
Powdered, resin-bonded, flexibilised, high-performance, mould-resistant, water-repellent, fast-setting and hardening grout , type CG 2 F W A according to EN 13888, for joints up to 20 mm, with very low emission of volatile organic compounds.
Levelling Base
Wedge for Levelling System
Tile Epoxy Cleaner
Special cleaner for epoxy grouts.
Special cleaner for epoxy grouts.
Tile Grout 5-15 mm
Cement-based powder grout, classified as CG2 to UNI EN 13888,…
Cement-based powder grout, classified as CG2 to UNI EN 13888, for filling joints 5 to 15 mm wide.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004…
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
Multigrip
Multigrip is a single component, adhesion promoting primer, based on…
Multigrip is a single component, adhesion promoting primer, based on a styrene-acrylic resin water based emulsion and selected aggregates.
Tile Cleaner
Acid detergent for ceramic tiles.
Acid detergent for ceramic tiles.
Flex
Flexibilizing agent for Aquaproof and cementitious adhesives.
Flexibilizing agent for Aquaproof and cementitious adhesives.
T 50
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors.…
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors. Suitable for single-fired and double-fired ceramic materials and aerated concrete materials. It can also be used as thin-layer masonry mortar.
T 480
A deformable cement adhesive for all sizes of porcelain stoneware…
A deformable cement adhesive for all sizes of porcelain stoneware tiles and glazed tiles. Even for overlap. For indoor and outdoor use also on substrates subject to movement.
Details
Tile Primer is a pre-treatment based on acrylates in water dispersion which once applied and dried forms a coloured, hard film with high water resistance. Tile Primer improves the adhesion of skimming and levelling surfaces by regulating the absorption on cement or anhydrite and gypsum-based surfaces.
Instructions for use
The substrate must be clean and dry. Shake the product before use. The product can be diluted with water (see table below). Tile Primer can be applied with a brush, brush or spray. The application must be made above +5 °C and for external works it must not be made in imminent rain. Normally only one coat is sufficient. In case of very absorbent substrates repeat the treatment a second time. When the applied film is no longer sticky, it is possible to apply the tile adhesive or Floorrep self-levelling mortar or Levellina 0-10, Levellina 5-30 and Levellina 5-40.
Clean the tools with water while Tile Primer is still fresh. Dry residues should be removed with nitro solvent.
Storage
Tile Primer is frost sensitive. Store at temperatures above +5 °C. Remains stable for at least 18 months if stored in the original unopened packaging.
Warnings
- Do not apply Tile Primer at temperatures below +5 °C. The product is sensitive to frost.
- In case of external work, do not apply the product when it is about to rain.
- Shake the product before use.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Bright red | 5741 | canister | 25 kg |
28 canisters
|
|
| Bright red | 5520 | canister | 5 kg |
128 pieces
|
|
Tile Primer can be used:
- for the treatment of gypsum substrates on which ceramic tiles are to be applied using cementitious adhesives. It protects the gypsum from humidity and insulates it from cement, preventing the known expansive reaction between cement and gypsum.
- as a consolidating pre-spreading for cement-based substrates that are crumbling or need pre-treatment, before spreading Floorrep self-levelling mortar or Levellina 0-10, Levellina 5-30 and Levellina 5-40 cementitious levelling mortar.
- as consolidation and waterproofing of cement surfaces.
- as pre-treatment of cementitious substrates such as screeds or plasters before the application of cementitious adhesives or levelling compounds
| Consistency | red fluid |
| Density | approx. 1,01 kg/l |
| pH (MIT 02)* | 7-8 |
| Dry residual | approx. 18,5% |
| Ash rate | approx. 0,01% |
| Application temperature | >+5 °C |
| Drying time | 1 hours |
| Heat resistance of the hardened film | up to +80 °C |
* Torggler Internal Methods (MIT) are available upon request.
| Surface | Comsumption Tile Primer | Mixing ratio |
| Gypsum, anhydrite, screeds with old residues of adhesive | approx. 80 to 150 ml/m2 | pure |
| Absorbent mineral substrates, concrete, cementitious screeds, lime / cement plasters, aerated concrete blocks | 1 coat approx. from 100 to 200 ml/m2 2 coats approx. from 50 to 70 ml/m2 |
1:1 diluted with water |
| On highly absorbent substrates or before laying wallpaper | More coats | 1:2 diluted with water |
Tile Primer consumption is approx. 80-200 g/m2 (see table).
Still missing information?
Contact our team for personalized support and product guidance.