Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
- Excellent UV and ageing resistance
- Excellent chemical resistance
- Excellent workability
- Sandable after hardening
Variations
Choose the perfect solution for your project
White 9016
Grey 7012
Grey 7040
Black 9005
Application areas
Choose Sitol® Deck Caulking S for
- Sealing of teak seams
- Sealing of deck-hull connections
- Perimeter sealing of synthetic teak coverings
Application areas
Where Sitol® Deck Caulking S performs best
Discover more
Other solutions you might be interested in
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Domus
Neutral curing silicone sealant with anti-mould agent and low modulus…
Neutral curing silicone sealant with anti-mould agent and low modulus of elasticity.
Neutral
Transparent, neutral-curing silicone sealant for corner joints and glass.
Transparent, neutral-curing silicone sealant for corner joints and glass.
Fire Resistant
Neutral silicone sealant with high fire resistance.
Neutral silicone sealant with high fire resistance.
Heat Resistant
Acetic silicone sealant for temperatures up to 300 °C.
Acetic silicone sealant for temperatures up to 300 °C.
Details
Sitol® Deck Caulking S is a high-quality, neutral cross-linking, quick-hardening, sandable, professional silicone sealant for caulking classic teak. It is also suitable for sealing between deck and synthetic teak. It hardens by reaction with moisture to form a permanently elastic mass capable of absorbing the expansion of teak planks. It has constant and permanent elasticity from -50 °C to +150 °C and excellent resistance to UV radiation, ageing in general, chemicals and salt water. It does not shrink or crumble. It is free of solvents and isocyanates: It does not require training according to Annex XVII of Regulation (EC) 1907/2006. It adheres to smooth and porous surfaces of any kind provided that they are clean, degreased, dry and compact. In the case of sealing new seams, it is recommended to treat the joint sides with Sitol® Primer Deck Caulking. It meets the European requirements for CE marking of sealants for pedestrian walkway applications (EN 15651-4: PW EXT-INT 20 HM).
Instructions for use
The application temperature of both environment and materials can vary between +5 °C and +40 °C. Substrates must be solid, clean and free of oil or dust.
- Remove excess adhesive from the seams after bonding.
- Remove any residue with a vacuum cleaner or compressed air to bring the seams to new wood.
- Prime the joint sides with Sitol® Primer Deck Caulking, 1 to 6 hours before sealing.
- Extrude plenty of Sitol® Deck Caulking S, making sure it goes all the way through the seam. Avoid starts, stops or changes of direction that might include air.
- Immediately after application, run a flexible squeegee over the seam to eliminate any gaps and improve adhesion on the sides, leaving an excess layer of rubber.
- Allow the rubber to cross-link for at least 48 hours before cutting the sealant.
- After hardening, sand the deck surface, flush with the deck, using 80-grit sandpaper.
Cleaning
In the plastic status of the sealant, using acetone or other solvent; after hardening, only mechanically.
Storage
Sitol® Deck Caulking S must be stored in a dry and cool environment. Under these conditions, storage stability is at least 12 months. Avoid humid environments and heat sources. Cartridges that are not completely used can be stored for about 3 months if closed tightly.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| White 9016 | 5693 | cartridge | 12x290 ml |
116 cardboards
|
|
| Grey 7012 | 5691 | cartridge | 12x290 ml |
116 cardboards
|
|
| Grey 7040 | 5660 | cartridge | 24x290 ml |
64 cardboards
|
|
| Black 9005 | 5708 | cartridge | 12x290 ml |
116 cardboards
|
|
| White 9016 | 5694 | foil bag | 20x600 ml |
36 cardboards
|
|
| Grey 7012 | 5692 | foil bag | 20x600 ml |
36 cardboards
|
|
| Grey 7040 | 5661 | foil bag | 20x600 ml |
36 cardboards
|
|
| Black 9005 | 5709 | foil bag | 20x600 ml |
36 cardboards
|
|
- Sealing of teak seams
- Sealing of deck-hull connections
- Perimeter sealing of synthetic teak coverings
| PARAMETER AND METHOD | VALUE |
| Density (ISO 1183-1) | 1.39 g/ml |
| Application temperature | +6 °C to +40 °C |
| Surface cross-linking time (MIT 33*) | Approx. 40 min |
| Hardening speed from outside to inside at 23 °C (MT 32*) | Approx. 3 mm in 24 h |
| Operating temperature | -50 °C to +200 °C |
| Surface hardness (ISO 868) | Approx. 40 |
| Elongation at break (DIN 53504 – Die S3A) | 700 % |
| Tensile strength at break (DIN 53504 – Die S3A) | 1.0 MPa |
| Modulus of elasticity at 100 % (DIN 53504 – Die S3A) Die S3A) | 0.6 MPa |
| Elongation at break (EN ISO 8339/A – M1p) | 200 % |
| Tensile strength at break (EN ISO 8339/A – M1p) | 0.7 MPa |
| Modulus of elasticity at 100 % (EN ISO 8339/A – M1p) | 0.62 MPa |
| Maximum working elongation (ISO 11600) | ±20 % |
| Odour after cross-linking | None |
* Torggler Internal Methods are available on request.
Consumption per linear metre joint cross-section 5 x 5 mm: 50 ml
Still missing information?
Contact our team for personalized support and product guidance.