Ekomix Plus
Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.
Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.
- Excellent workability
- Excellent adhesion
- Coarse grain
Variations
Choose the perfect solution for your project
White
Grey
Application areas
Choose Ekomix Plus for
- Bonding and rendering mineral wool panels
- Product with requirements in accordance with ETAG 004
Application areas
Where Ekomix Plus performs best
Discover more
Other solutions you might be interested in
Membrane DUO 2S
Variable SD sealing membrane suitable for the construction of both…
Variable SD sealing membrane suitable for the construction of both internal and external sealing nodes. The fully self-adhesive side makes installation extremely quick and easy.
Mastofix® Hydro Light
Hydrophobised skimming adhesive in powder form based on cement, selected…
Hydrophobised skimming adhesive in powder form based on cement, selected mineral aggregates, EPS spheres, additives. For bonding and skimming EPS insulation boards, MW rock wool, and PIR foamed polyiso foam.
Guaina EPDM
EPDM membrane for perimeter sealing of buildings or waterproofing of…
EPDM membrane for perimeter sealing of buildings or waterproofing of roofs and joints.
Membrane DUO
Variable SD sealing membrane suitable for the construction of both…
Variable SD sealing membrane suitable for the construction of both internal and external sealing nodes. The fully self-adhesive side makes installation extremely quick and easy.
Varitherm
Sintered expanded polystyrene panel with graphite additive with excellent mechanical…
Sintered expanded polystyrene panel with graphite additive with excellent mechanical compactness, high thermal insulation and a high density of 140 kg/m³ for use as an insulating underlay, thermal bridge correction, underlay for windows and as a direct, through or press-fit block.
Mastofix®
Adhesive and levelling compound based on cementitious, selected mineral aggregates,…
Adhesive and levelling compound based on cementitious, selected mineral aggregates, additives. Grain size approx. 1 mm. For bonding and smoothing in ETICS systems of EPS, MW and PIR insulation panels.
Steinopor EPS-F Plus
Expanded polystyrene panel with graphite/other carbon derivatives additive, cut from…
Expanded polystyrene panel with graphite/other carbon derivatives additive, cut from block, with straight edge for thermal insulation of vertical external walls.
Rete SSA
160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim…
160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.
Mastofix® Light
Adhesive and levelling compound based on cementitious, selected mineral aggregates,…
Adhesive and levelling compound based on cementitious, selected mineral aggregates, EPS fibres, additives. For bonding and smoothing of EPS, MW, and PIR-coated polyiso foam insulation panels.
PCV tape
Compression deformable PVC 4th side sealing tape to seal and…
Compression deformable PVC 4th side sealing tape to seal and adapt to frame cavities.
Butyl tape with alufoil
Butyl tape with aluminium foil for hermetic seals.
Butyl tape with aluminium foil for hermetic seals.
Butyl tape grey
Adhesive butyl sealing tape for airtight joints on the 4th…
Adhesive butyl sealing tape for airtight joints on the 4th side of the window.
Details
Instructions for use
Preparation for use
The substrate must be dry, not frozen, free of dust, efflorescence, not water-repellent and solid. The wall flatness must be within the tolerances prescribed by ÖNORM DIN 18202.
Product preparation
Mix Ekomix Plus with approx. 6.00-6.25 litres of clean water per 25 kg bag (0.24-0.25 litres of water per 1 kg powder) in a clean container and stir constantly using a low speed mortar mixer (max. 500 rpm) until the mixture is homogeneous and then leave to stand for approx. 5 minutes. Mix again and, if necessary, correct the consistency with a small amount of water. Do not add other substances to the product.
Instructions for use
Bonding of the insulation panels: apply the adhesive using the spots and strip method (bonding surface approx. 40 %). Strip width approx. 4 cm, height approx. 2 cm. Render of insulation panels: apply the render approx. 2-3 days after bonding (depending on the weather conditions and any additional dowelling) in a minimum thickness of 3 mm and then spread with a toothed trowel. Bury the T50 reinforcement mesh in the skimming bed; at the joints overlap by at least 10 cm and cover it completely with the trowel. When the mortar is completely dry (maximum 7 days depending on the weather conditions), the suitable Torggler EKOR wall coating can be applied.
The mixture workability time is about 4 hours. Material left in open containers should no longer be used or mixed with fresh material. During the processing and drying step, the temperature of the surrounding environment and the substrate must not fall below +5 °C. Protect against frost, too fast drying (direct beating sun, wind) and subsequent humidity (rain) until completely dry.
Storage
Store Ekomix Plus in a dry and sheltered place. In the original closed bags it is kept for at least 12 months. PROTECT FROM HUMIDITY.
Warnings
Ekomix Plus, in its grey version, is admixed with a special reducing agent to ensure compliance with the limit concentration of 0.0002% (2 ppm) of water-soluble hexavalent chromium (in relation to the weight of the Portland cement contained). See the information on the packaging according to Directive 2003/53/EC.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| White | 5456 | bag | 25 kg |
50 bags
|
|
| Grey | 5429 | bag | 25 kg |
50 bags
|
|
Ekomix Plus is suitable for:
- Bonding and rendering mineral wool panels
- Product with requirements in accordance with ETAG 004
| Product | Ekomix Plus White | Ekomix Plus Grey |
| Appearance | white powder | grey powder |
| Mixing water | 24-25% (6.00-6.25 l per 25 kg bag) | 24-25% (6.00-6.25 l per 25 kg bag) |
| Particle size | ≤0.8 mm | ≤0.8 mm |
| Workability time | 4 hours | 4 hours |
| Open time | 20 minutes | 20 minutes |
| Adhesion on concrete | ≥ 0.6 MPa | ≥ 0.6 MPa |
| Adhesion to the wool panel | ≥ 0.08 MPa | ≥ 0.08 MPa |
| Application temperature | from + 5 °C to +25 °C | from + 5 °C to +25 °C |
| Thermal resistance | -30 °C to +80 °C | -30 °C to +80 °C |
| Polymerization | from 6 to 24 hours | from 6 to 24 hours |
The consumption of Ekomix Plus depends on its application.
As adhesive: from 4 to 5 kg/m².
As a rendering coat: from 3 to 4 kg/m².
Still missing information?
Contact our team for personalized support and product guidance.