Heat Resistant
Acetic silicone sealant for temperatures up to 300 °C.
Acetic silicone sealant for temperatures up to 300 °C.
Acetic silicone sealant for temperatures up to 300 °C.
- High resistance to heat
- Resistance to aging
- Resistant to UV rays
- Excellent for industrial plants
Application areas
Where Heat Resistant performs best
Discover more
Other solutions you might be interested in
Mirror
Neutral silicone adhesive for bonding mirrors.
Neutral silicone adhesive for bonding mirrors.
Sitol® Primer Glass
Primer formulated as a black pre-treatment for glass surfaces to…
Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.
Sitol® Deck Bonding LV
Low viscosity hybrid adhesive for bonding natural and synthetic teak…
Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.
Sitol® M.E.D.
A high-performance structural adhesive and hybrid sealant for all types…
A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.
Sitol® Meta 45
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that…
A two-component, methacrylate-based structural adhesive with excellent thixotropic properties that enable the creation of vertical lines without dripping and medium curing time.
Adhesive for EPDM membrane
High-viscosity adhesive for the façade application of EPDM membrane on…
High-viscosity adhesive for the façade application of EPDM membrane on vertical and horizontal surfaces.
Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Sitol® Primer Deck Caulking
Primer for sealants on wooden and porous substrates.
Primer for sealants on wooden and porous substrates.
Sitol® Deck Caulking S
Neutral, sandable silicone sealant for teak caulking.
Neutral, sandable silicone sealant for teak caulking.
Sitol® Deck Bonding
Hybrid polymer-based adhesive-sealant with extended open time for natural and…
Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.
Sitol® Deck Caulking
Hybrid polymer-based, sandable sealant for teak caulking.
Hybrid polymer-based, sandable sealant for teak caulking.
Sitol® Marine
Fast hardening adhesive-sealant based on hybrid polymers with high initial…
Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.
Details
Heat Resistant is a silicone sealant with acetic-crosslinking, characterised by very high resistance to heat. Up to temperatures of 300°C the elasticity of Heat Resistant is not affected, the seal remains perfect and has exceptional resistance to aging. Applications more than 20 years old, even when subjected to ultraviolet rays and atmospheric agents, show no signs of flaking and are absolutely free of surface hairline cracks.
Instructions for use
- The sides of the joint must be clean, degreased and dry.
- Form two strips of sealant on the flange facade.
- Join the two faces and bolt.
- Extrude the sealant on the seams.
- Seal the bolts.
- Smooth off with a damp paint scraper.
Cleaning tools
While the sealant is in the plastic state use solvents; following setting clean only mechanically.
Storage
Heat Resistant must be stored in a cool, dry place. Stored in these conditions the product will keep for at least 18 months. Partly used cartridges can be stored for approx. 3 months provided they are tightly closed.
Warnings
The non-vulcanised mass irritates the eyes.
| Color | Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|---|
| Red 3013 | 6185 | cartridge | 24x310 ml |
64 cardboards
|
|
The high modulus of elasticity and excellent adhesion to the various types of material make it especially indicated for heads, caps, flanges and piping in internal-combustion engines. It is also perfect for use in boilers, pipe fittings and pipes of heating systems, heat exchangers, etc.
| PARAMETER AND TEST METHOD | VALUE |
| Density (UNI 8490/2) | 1,307 g/ml |
| Application temperature | from +5 °C to +40 °C |
| Skin-over time (MIT 33*) | approx. 20 minuti |
| Hardening rate from the outside to the inside at 23 °C (MIT 32*) | approx. 2,0 mm in 24 h |
| Operating temperatur | from -50 °C to +300 °C |
| Surface hardness – Shore A (DIN 53505) | approx. 45 |
| Elongation at break (DIN 53504 -Punch S3) | 1000% |
| Tensile strength at break (DIN53504 – Punch S3) | 2,5 N/mm2 |
| Modulus of elasticity at 100% (DIN 53504 -Punch S3) | 0,4 N/mm2 |
| Stretching to breaking point (EN ISO 8339/A – Alu support – Aup) | 50% |
| Tensile strength at break(EN ISO 8339/A – Alu support – Aup) | 0,4 N/mm² |
| Maximum operating elongation | 20% |
| Resistance to acid | excellent |
| Resistance to bases | excellent |
| Odour after skin-over | none |
* Torggler Internal Methods (MIT) are available on request.
| COVERAGE GUIDE TABLE | ||
| JOINT WIDTH X DEPTH (MM) | QUANTITY USED PER LINEAR METRE | LINEAR METRES COVERED WITH ONE CARTRIDGE |
| 6×6 | 36 ml | 8,7 |
| 8×8 | 64 ml | 4,9 |
| 10×10 | 100 ml | 3,1 |
Still missing information?
Contact our team for personalized support and product guidance.