Tile Cleaner
Acid detergent for ceramic tiles.
Acid detergent for ceramic tiles.
- Ready to use
- Acts effectively to clean from stains and efflorescence
Discover more
Other solutions you might be interested in
Tile Bond 2K
Two-component epoxy mortar, class R2 T according to EN 12004,…
Two-component epoxy mortar, class R2 T according to EN 12004, for bonding and grouting ceramic elements, ceramic and glass mosaic, marble and natural stone, indoors and outdoors, in wet and immersion environments.
Ultimate
Powdered, resin-bonded, flexibilised, high-performance, mould-resistant, water-repellent, fast-setting and hardening grout…
Powdered, resin-bonded, flexibilised, high-performance, mould-resistant, water-repellent, fast-setting and hardening grout , type CG 2 F W A according to EN 13888, for joints up to 20 mm, with very low emission of volatile organic compounds.
Levelling Base
Wedge for Levelling System
Tile Epoxy Cleaner
Special cleaner for epoxy fillers, suitable for cleaning epoxy fillers.
Special cleaner for epoxy fillers, suitable for cleaning epoxy fillers.
Tile Grout 5-15 mm
Cement-based powder grout, classified as CG2 to UNI EN 13888,…
Cement-based powder grout, classified as CG2 to UNI EN 13888, for filling joints 5 to 15 mm wide.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004…
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
Multigrip
Multigrip is a single component, adhesion promoting primer, based on…
Multigrip is a single component, adhesion promoting primer, based on a styrene-acrylic resin water based emulsion and selected aggregates.
Tile Primer
Improved adhesion, absorption and insulation pretreatment for the installation of…
Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.
Flex
Flexibilizing agent for Aquaproof and cementitious adhesives.
Flexibilizing agent for Aquaproof and cementitious adhesives.
T 50
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors.…
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors. Suitable for single-fired and double-fired ceramic materials and aerated concrete materials. It can also be used as thin-layer masonry mortar.
T 480
A deformable cement adhesive for all sizes of porcelain stoneware…
A deformable cement adhesive for all sizes of porcelain stoneware tiles and glazed tiles. Even for overlap. For indoor and outdoor use also on substrates subject to movement.
Details
Acid detergent for ceramic tiles. For cleaning cement deposits and/or residues from ceramic materials, after their laying or removal of traces of cement, lime and saline efflorescence from non delicate substrates. Specific dissolving action.
Instructions for use
Remove the bulk of the dirt mechanically (e.g. with a scraper or steel brush). If necessary, protect surrounding areas from acid splashes. Wet absorbent surfaces such as terracotta, concrete and plaster. Put on gloves, boots and safety goggles. Apply the cleaner with a scrubbing brush in strips and leave to work for approx. 5 minutes. Remove the acid liquid from the floor, e.g. with a sponge, then rinse thoroughly with water, brushing vigorously. Dry with a cloth. Repeat the entire process if necessary.
Storage
Tile Cleaner should be stored in a cool place away from direct sunlight and will remain stable for at least 36 months if kept in its original sealed packaging. Protect from frost.
Warnings
- Tile Cleaner causes severe skin burns and serious eye damage. Avoid contact with skin.
- Tile Cleaner must be protected from frost.
| Code | Packaging | Packaging size | Pallet | Barcode |
|---|---|---|---|---|
| 6091 | canister | 6kg |
128 pieces
|
|
Tile Cleaner is suitable for cleaning cement, lime, adhesive and cementitious filler residues, as well as general dirt, from ceramic tiles and mosaics, porcelain surfaces such as sinks and bathtubs, and chrome-plated, stainless steel and anodised aluminium surfaces. Removal of salt efflorescence from ceramic tiles, grouting, concrete and plaster. When applied correctly, it does not damage joints, even coloured ones, made with Tile Grout ≤8 mm and Tile Grout 2-15 mm.
| PARAMETER | VALUE |
| Appearance | Clear liquid |
| Chemical base | Sulfamic acid |
| Dry matter | 15% |
| Density | 1,1 kg/litro |
| pH | 1 |
| Application temperature | from +1 °C to +40 °C |
| Dirt action time | approx. 5 minutes |
The consumption of Tile Cleaner depends on the surface, the degree of soiling and the required level of cleanliness.
Still missing information?
Contact our team for personalized support and product guidance.