Thermal Insulation

A well-insulated building ensures pleasantly warm temperatures in winter and protects against heat in summer. The indoor climate is balanced throughout the year, without major temperature fluctuations. Torggler’s thermal insulation systems fulfil all these needs in the beste ways possible.

Mastofix® Light

Adhesive and levelling compound based on cementitious, selected mineral aggregates, EPS fibres, additives. For bonding and smoothing of EPS, MW, and PIR-coated polyiso foam insulation panels.

Mastofix®

Adhesive and levelling compound based on cementitious, selected mineral aggregates, additives. Grain size approx. 1 mm. For bonding and smoothing in ETICS systems of EPS, MW and PIR insulation panels.
GPCSIVW2_EN998-1

Ekomix Plus

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.

Ekomix

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and rendering polystyrene insulation panels. Component of the Ekomix EPS system.

Ekomix Panel EPS White

White sintered expanded polystyrene panel, cut by block, straight edge for the thermal insulation of vertical walls with coat.

Ekomix Panel EPS Grey

Sintered expanded polystyrene panel with graphite additive, cut from block, straight edge for the thermal insulation of vertical walls with coat.

Ekomix Panel Base

Sintered polystyrene foam panel with external film transparent to resist water absorption printed on straight edge for the creation of the starting skirting in coat systems.

Steinopor EPS-F Plus

Expanded polystyrene panel with graphite/other carbon derivatives additive, cut from block, with straight edge for thermal insulation of vertical external walls.

Ekomix Panel Wool – P

Mineral wool insulation panels with double thickness for thermal insulation, soundproofing and fire protection, especially for thermal insulation composite systems. Manufactured in accordance with the required environmental criteria.

Varitherm

Sintered expanded polystyrene panel with graphite additive with excellent mechanical compactness, high thermal insulation and a high density of 140 kg/m³ for use as an insulating underlay, thermal bridge correction, underlay for windows and as a direct, through or press-fit block.

eTics Twister

Universal screw anchor for EPS, MW, PIR and PF insulation panels.

Termoz 6H

Screw-in anchor for installation on wooden structures, wooden panels, OSB, chipboards, MDF or gypsum fibre.

Termoz CN 8

Percussion driven anchor with composite pin for all types of insulation panels.

Termoz CS II

Screw-in anchor for all types of insulation panels.

R-TFIX-8S

Screw-in insulation anchor with high performance on all types of material, recommended for ETICS.

Washer PS60

Grey EPS cover plate for Termoz CS II and Termoz 6H screw-in anchors. Suitable for EPS and PIR panels.

Washer MW60

Hole cover disc made of mineral wool for Termoz CS II and Termow 6H screw-in anchors. Suitable for MW panels.

Rete SSA

160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.

PVC basic baseboard profile

PVC starter profile, L-shaped, for thermal insulation system with thickness up to 240 mm in combination with the insertion profile.

PVC mesh corner bead

PVC corner protection profile with fibreglass mesh for thermal insulation systems.

Corner bead roll

Corner roll profile for variable angle creation with fibreglass mesh for thermal insulation systems.

Window connection profile 3D-PRO

Heavy-duty rainproof profile for plaster connections to windows, doors and similar construction elements with stress-relieving function in three 3D dimensions, protective lip and expanding seal.

Clip on profile

Connection profile for aluminium starter profile, with hidden drip ledge.

PVC baseboard profile

PVC insertion profile in combination with starter profiles L55, L100, L160, hermetically seals and completes the starting point of ETICS systems, with hidden drip ledge.

Drip edge profile

PVC corner profile with fibreglass mesh for making drip ledges on balconies, ledges, window lintels, horizontal edges.

Reveal corner angle for windows

Preformed three-dimensional reinforcement mesh for reinforcing the inside corners of window and door soffits on ETICS systems.

Rustication mesh

Rusticated mesh for longitudinal reinforcement in the grooves of eTics systems.

Sheet metal connection profile

Connecting profile for flashings, adjustable, it guarantees a watertight seal and perfect aesthetics thanks to the hidden drip ledge.

Movement joint profile

Vertical expansion profile with protective tape and flexible band to ensure the aesthetic safety on façades of possible minor stresses on non-structural construction elements.

Plaster stop profile

End profile with mesh for perfect closure of façade coatings. It can be used on ETICS or reinforced skim coats up to 3 or 6 mm.

Movement joint profile horizontal Profi PU

Horizontal expansion profile with integrated PE sealing tape to ensure a watertight seal, small movements and compressive stress of the joint located in the transition zone between two structures, e.g. between a solid and a lightweight construction.

UMP ALU TR

Rectangular plate for securing heavy loads in thermal insulation systems and preventing the formation of thermal bridges.

K1-PE

Hinge mounting element.

Electric box E-LINE

Insulated electrical box for securing electrical components in external thermal insulation systems, avoiding the formation of thermal bridges on the insulation.

TRA WIK PU

Mounting bracket made of rigid, rot-proof polyurethane foam, with three foam washers. The 20 mm grid on both sides marks the precise cut of the saw, allowing the desired thickness to be used, from 60 to 200 mm. Recommended for hinges and parapets. (incl. 3 screw anchors SXRL).

Varir 120×160

Expansion moulded mounting block in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.

Variz 90

Expansion moulded mounting cylinder in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.

Milling tool plate

Disc to match the depth milling bits for fitting VARIZ 90 mounting cylinder.

Milling tool rod

Element to be combined with the Ø 90 mm disc for fitting the VARIZ 90 mounting cylinder.

PE tape

Single-sided adhesive, closed-cell PE sealing tape for the use on the underside of windows and doors. Maintains impermeability to water even in the presence of backwater.

Insulation membrane ISO Outside

Insulating membrane for timber, PVC and aluminium windows and doors, made up of high-performance polymeric tape in water vapour-proof fabric (from the inside to the outside), which can be plastered and painted. The UV-resistant surface is coated with a high-quality acrylic adhesive. Applied on the inside of the primary joint between the wall and the sub-frame or window, it follows the movements of the connected parts thanks to its high elongation capacity.

Self-expanding joint sealing tape EXP Multi

Multi-functional BG1/BGR pre-compressed, single-sided tape made of soft, fine-pored, permanently elastic polyurethane foam. For standard-compliant waterproofing of defined structural connection joints (windows and doors) and for sealing assembly joints between window and building shell.

Self-expanding joint sealing tape EXP

Joint tape BG1 (600 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.

Self-expanding joint sealing tape EXP BG2

Joint tape BG2 (300 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.

Membrane DUO

Variable SD sealing membrane suitable for the construction of both internal and external sealing nodes. The fully self-adhesive side makes installation extremely quick and easy.

Guaina EPDM

EPDM membrane for perimeter sealing of buildings or waterproofing of roofs and joints.

PCV tape

Compression deformable PVC 4th side sealing tape to seal and adapt to frame cavities.

Butyl tape grey

Adhesive butyl sealing tape for airtight joints on the 4th side of the window.

Window lintel element Lai-Sys

Window lintel element Lai-Sys made of expanded polystyrene (EPS) for accommodating window and door reveals in thermal insultation systems.

Window reveal element Lai-Sys

Window reveal element Lai-Sys made of expanded polystyrene (EPS) for accommodating window and door reveals in thermal insultation systems.