Waterproofing

Our waterproofers prevent damage from moisture – because a simple silicone joint does not replace a complete waterproofing. Be it in the sanitary area as well as on the roof or in the basement. Our products help your building to stay dry, because in the worst case, moisture can lead to permanent damage.

Flexistar

Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
EC1_(GB)_black_ CPIMCIR_EN1504-2 CMP_EN14891

Aquaproof

Osmotic fine mortar, for rigid waterproofing of external and interior surfaces of cementitious substrates and masonry, with water in both positive and negative pressure.
CMCIR_EN1504-2

Flex 1K

Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.
EC1plus_(GB)_black_ CMP_EN14891

Flex 2K

Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
CPIMCIR_EN1504-2 CM02P_EN14891 Übereinstimmungszeichen – caso 1

Stop

Ultra-rapid cementitious mortar for stopping gushes and/or localised pressurised water penetration from cracks, fissures and holes, as well as for the waterproofing of substrates subject to strong infiltration.

Asfredol 1000

Cold asphalt, composed of an anionic bituminous emulsion, free of organic solvents, for waterproofing and surface protection of porous surfaces, both wet and dry.
CPIMCIR_EN1504-2

Aquatech

Single-component liquid waterproofing sheath in water emulsion.
EC1plus_(GB)_black_ DM01P_EN14891 Übereinstimmungszeichen – caso 2

Promural Silicon

Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.
PIMCIR_EN1504-2

Sitol A

Bituminous, waterproofing and anti-corrosion paint.

Black Hydro Easy

Multipurpose, thixotropic, bituminous liquid waterproofer made up of inert fillers, elastomeric resins and additives. Suitable for waterproofing earth retaining foundation walls. Used as sealant and finisher for roof waterproofing and insulation panel bonding applications.
CPIMCIR_EN1504-2

Black Hydro Light

Elastomeric bituminous waterproofer lightened with rubber granules for waterproofing horizontal and vertical concrete and brick surfaces.
CPIMCIR_EN1504-2

Black Hydro Spray

Solvent-based bituminous waterproofing protective sealant in spray can, suitable on any type of substrate.

Flex PU

Single-component polyurethane liquid membrane for waterproofing and protection. Suitable for waterproofing and protection of roofs, lightweight sheet metal or fibre cement roofs, asphalt membranes, parking lots and stadium stands, bridge platforms and irrigation channels.
EOTA

Flex PU 2K

Two-component, solvent-free thixotropic coating, suitable for waterproofing and protecting tanks.

Flex PU Primer

Polyurethane based primer, with low viscosity, suitable for porous and non-porous substrates.
EOTA

Flex PU Finish

Single-component non-yellowing elastic membrane for protection and waterproofing.
EOTA

BW 200

Multi-function bituminous waterproofer.
CPRPIMCIR_EN1504-2 DM01_EN4891

BW 100

Bituminous liquid waterproofer.
PIMCIR_EN1504-2