Restoration Systems

The main causes of deterioration of plasters and masonry are in most cases due to ascending moisture and infiltration humidity. In both cases, water penetrates the masonry and carries the salts dissolved in it. With this in mind, Torggler has developed products with very high levels of performance in order to solve even the most critical moisture problems and guarantee their long-term effectiveness.

Rinzaffo

Pre-mixed cementitious mortar for anchorage rough coat, for renovation plasters and/or dehumidifying plasters, as well as for plasters and mortars for masonry in general.
GP CSIV W2 - EN998-1

Risan One

Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation plasters on masonry affected by rising damp and saline efflorescence.
R - EN998-1

Intonaco WTA

Pre-mixed plastering mortar for renovating masonry subject to rising capillary damp with high resistance to saline.
R - EN998-1

Finitura

Pre-mixed cementitious mortar for highly breathable finishing of renovating and/or dehumidifying plasterwork.
GP CS II Wc1 - EN998-1 GP CS II Wc0 - EN998-1

Finissimo

Pre-mixed mortar based on special binders for smooth finishes to renovating, dehumidifying and/or traditional plasterwork.

Antisale

Treatment for protection against saline efflorescence.

Ekor DP 501

Pre-mixed cementitious mortar for dehumidifying plasters on masonry affected by rising damp and saline efflorescence.
R - EN998-1