Restoration

Self-extinguishing PU adhesive for bonding external wall insulation panels.

Glow wire resistant polyurethane foam for electrical installations.

Single-component, quick-hardening polyurethane adhesive for bonding plasterboard and insulation panels.

Polyurethane adhesive for waterproof bonding and sealing.

Specific one-component polyurethane adhesive for waterproof sealing of hydraulic elements.

Polyurethane foam for various type of installations.

Polyurethane foam with extended open time, reduced post-expansion, and high tear resistance.

Flexible polyurethane foam for the assembly of wooden, PVC or aluminium window frames and shutters, up to -10 °C.

Multi-purpose polyurethane foam.

Elastic one-component polyurethane foam for the assembly of window frames in wood, pvc or aluminium. It guarantees rapidity and cleaning during installation. Adheres to most porous and non-porous supports.

Highly adhesive single-component polyurethane foam for installation of roof tiles or bent tiles. It hardens by reaction with the humidity of the atmosphere and of the substrates. It guarantees quick, easy and clean installation operations.

Torggler Lamiera^® is a neutral, low-modulus silicone sealant, specifically designed for sheet metal work and insulated panels.

Transparent, neutral-curing silicone sealant for corner joints and glass.

Neutral cured silicone sealant for polycarbonate elements.

Bituminous adhesive-sealant for bonding and repairing membranes.

Polyurethane foam with extended open time, reduced post-expansion, and high tear resistance.

Highly adhesive single-component polyurethane foam for installation of roof tiles or bent tiles. It hardens by reaction with the humidity of the atmosphere and of the substrates. It guarantees quick, easy and clean installation operations.

Self-extinguishing PU adhesive for bonding external wall insulation panels.

Single-component, quick-hardening polyurethane adhesive for bonding plasterboard and insulation panels.

Polyurethane adhesive for waterproof bonding and sealing.

Solvent-based bituminous waterproofing protective sealant in spray can, suitable on any type of substrate.

Multi-function bituminous waterproofer.

Bituminous liquid waterproofer.

Premixed, high-strength, fibre-reinforced mortar, UNI EN 1504-3 PCC type and R4 class, applicable by casting in formwork for the reconstruction od structural components.

High-performance epoxy chemical anchor for structural fastening of heavy loads, including in seismic zones, with a service life of 100 years.

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.

Fibre-reinforced mortar based on NHL natural hydraulic lime for the repair and structural consolidation of plasters, including reinforced plasters and masonry.

Fibre-reinforced fine cementitious mortar suitable for repairing and reinforcing both reinforced and unreinforced plaster and masonry structures with very high mechanical performance.

Fibre-reinforced fine cementitious mortar with high mechanical performance suitable for restoration work and structural consolidation of plaster, including reinforced plaster and masonry.

Two-component epoxy adhesive for concrete casting joints.

Pre-mixed, fluid, self-levelling cementitious mortar for anchoring and precise grouting works.

Extra-fast setting, premixed cementitious mortar for small installation works.

Mixer for chemical anchors.

Cage for application of chemical anchors on perforated bricks in combination with threaded rods of different size. Hole diameter 12 mm and hole length 80 mm; hole diameter 15 mm and hole length 85 mm; hole diameter 20 mm and hole length 85 mm.

Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast hardening.

Single component, polymer-modified bituminous thick coating.

Bicomponent, polymer-modified, bituminous thick coating.

Bituminous, waterproofing and anti-corrosion paint.

Bituminous liquid waterproofer.

Multi-function bituminous waterproofer.

Multipurpose, thixotropic, bituminous liquid waterproofer made up of inert fillers, elastomeric resins and additives. Suitable for waterproofing earth retaining foundation walls. Used as sealant and finisher for roof waterproofing and insulation panel bonding applications.

Two-component epoxy adhesive for concrete casting joints.

Two-component epoxy protection coating.

Protective, water-based, type C, two-component epoxy resin paint, according to EN 1504-2.

Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.

Resin-bonded cold bituminous emulsion ready to use.

A three-component, thixotropic epoxy-cementitious mortar, suitable for protecting and levelling both vertical and horizontal surfaces exposed to moisture and requiring good chemical resistance and high abrasion resistance.

Rasoepoxy It is a two-component epoxy system, consisting of epoxy resins. It is designed to cure even on damp surfaces, both indoors and outdoors, forming a compact, waterproof layer with high abrasion resistance. It is suitable for subsequent coating with epoxy or polyurethane finishes, or with waterproofing products from the Polyurea range.

Premixed, high-strength, fibre-reinforced mortar, UNI EN 1504-3 PCC type and R4 class, applicable by casting in formwork for the reconstruction od structural components.

Oven-dried, washed quartz sand, intended for use as a filler in epoxy and polyurethane resin systems.

Epoxy resin for the pre-treatment of absorbent surfaces prior to the application of epoxy or polyurethane resins, or waterproofing products from the Polyurea range. It can be used as a primer or for the creation of quartz-filled epoxy screeds, as it complies with the requirements of standard EN 13813.

Fast curing hybrid adhesive and sealant suitable for wet surfaces.

High performance polyurethane adhesive/sealer for façades and floors.

Closed-cell polythene plugging cord of variable thickness for preparation ofexpansion joints.

Neutral smoothing agent based on amphoteric surfactants in aqueous solution, for professional surface finishing of connection joints and expansion joints made with silicone, acrylic and hybrid sealants.

Two-component epoxy adhesive for concrete casting joints.

Two-component epoxy protection coating.

Protective, water-based, type C, two-component epoxy resin paint, according to EN 1504-2.

A single-component, silanised polyurethane-based waterproof adhesive that is elastic and can be applied with a trowel. Used for bonding and waterproofing the overlaps of the sheets in the Evaproof range.

A flexible, UV-resistant, solvent-free acrylic protective coating in water-based dispersion for indoor and outdoor use.

Polyurethane primer specially formulated for impregnating Evaproof membrane prior to bonding the butt or lap joints of the sheets during waterproofing works on terraces, roofs and swimming pools.

A quick-drying, single-component, flexible, liquid waterproofing membrane for indoor use.

A three-component, thixotropic epoxy-cementitious mortar, suitable for protecting and levelling both vertical and horizontal surfaces exposed to moisture and requiring good chemical resistance and high abrasion resistance.

Rasoepoxy It is a two-component epoxy system, consisting of epoxy resins. It is designed to cure even on damp surfaces, both indoors and outdoors, forming a compact, waterproof layer with high abrasion resistance. It is suitable for subsequent coating with epoxy or polyurethane finishes, or with waterproofing products from the Polyurea range.

A fast-drying, single-component polyurethane primer for touch-ups or overcoating of polyurethane and polyurea-based products.

A two-component membrane based on pure polyurea, to be applied by spraying using a high-pressure twin-mixer pump for the on-site creation of a waterproof coating on various types of substrate, where high adhesion, elasticity and tear resistance are required.

A two-component hybrid polyurea membrane, to be applied by spraying using a high-pressure bi-mixer pump for the on-site creation of a waterproofing membrane on various types of substrate.

PVC drain with vertical outlet, fitted with a square-shaped waterproof membrane flange (50 cm x 50 cm). The drain, available in various diameters (Ø75, Ø90 or Ø110 mm), is compatible with Evaproof waterproof membrane systems.

Thermoformed waterproofing element for sealing external/internal corners. It is used in conjunction with Evaproof Band, and Evaproof Adhesive (a polyurethane adhesive) must be used for its installation.

A flexible, waterproof polyolefin elastic tape produced by extrusion, used in conjunction with Evaproof Adhesive polyurethane adhesive to ensure a continuous waterproofing seal in Evaproof membrane systems and for the treatment of vertical upstands.

A single-component, silanised polyurethane-based waterproof adhesive that is elastic and can be applied with a trowel. Used for bonding and waterproofing the overlaps of the sheets in the Evaproof range.

Polyurethane primer specially formulated for impregnating Evaproof membrane prior to bonding the butt or lap joints of the sheets during waterproofing works on terraces, roofs and swimming pools.

A quick-drying, single-component, flexible, liquid waterproofing membrane for indoor use.

PVC drain with vertical outlet, fitted with a square-shaped waterproof membrane flange (50 cm x 50 cm). The drain, available in various diameters (Ø75, Ø90 or Ø110 mm), is compatible with Evaproof waterproof membrane systems.

Thermoformed waterproofing element for sealing external/internal corners. It is used in conjunction with Evaproof Band, and Evaproof Adhesive (a polyurethane adhesive) must be used for its installation.

A flexible, waterproof polyolefin elastic tape produced by extrusion, used in conjunction with Evaproof Adhesive polyurethane adhesive to ensure a continuous waterproofing seal in Evaproof membrane systems and for the treatment of vertical upstands.

A flexible, multi-layered, waterproof polyolefin membrane, designed to prevent cracking and separate structures, manufactured by extrusion, with a thickness of 1.25 mm and a weight of 525 g/m^², coated on both sides with polyester/polypropylene fibre fabric to ensure better adhesion to the cementitious adhesive.

Two-component epoxy mortar, class R2 T according to EN 12004 and RG according to EN 13888, for bonding and grouting ceramic tiles, ceramic and glass mosaics, marble and natural stone to a thickness of 2 to 20 mm.

Pre-fabricated, dimensionally stable internal and external corners made from coated, transversely stretchable and longitudinally stable polypropylene non-woven fabric.

Sealing tape made from coated, transversely stretchable and longitudinally stable polypropylene non-woven fabric, 120 mm.

Neutral silicone adhesive for bonding mirrors.

A monomeric silane-based water-repellent gel for creating chemical barriers against rising damp in masonry.

Pre-mixed mortar for the application of moisture-absorbing renders on walls affected by rising damp, with good resistance to salts.

A hydrophobic, cement-based levelling adhesive in powder form, comprising selected mineral aggregates, EPS beads and additives. For bonding and levelling EPS insulation boards, MW rock wool and expanded polyisocyanurate (polyiso) foam boards coated with PIR glass fibre mesh.

160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.

Cement-based levelling adhesive in powder form, comprising selected mineral aggregates, EPS beads and additives. For bonding and levelling EPS insulation panels, MW rock wool and polyisocyanurate (polyiso) foam panels coated with PIR glass fibre mesh.

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and rendering polystyrene insulation panels. Component of the Ekomix EPS system.

Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.

Quick-setting pre-mixed and fibre-reinforced mortar for restoration, renovation and levelling work both on façades and floors in thickness from 3 to 50 mm. Good adhesion and excellent workability. For manual and machine applications.

Modifier for cement and hydraulic lime based on special latex, highly saponification-resistant, flexibilising and strongly adhesive effect.

Adhesive and plasticising additive for the construction of renders and bridges.

Universal keying agent for protection against saline efflorescence.

Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent surfaces.

High-performance epoxy chemical anchor for structural fastening of heavy loads, including in seismic zones, with a service life of 100 years.

Self-extinguishing PU adhesive for bonding external wall insulation panels.

Glow wire resistant polyurethane foam for electrical installations.

Refractory mastic for grouting in situations exposed to temperatures up to 1000 °C.

Neutral silicone sealant with high fire resistance.

Acrylic sealant for applications subject to fire regulations up to EI 240.

Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.

EPDM membrane for perimeter sealing of buildings or waterproofing of roofs and joints.

Variable SD sealing membrane suitable for the construction of both internal and external sealing nodes. The fully self-adhesive side makes installation extremely quick and easy.

Compression deformable PVC 4th side sealing tape to seal and adapt to frame cavities.

Butyl tape with aluminium foil for hermetic seals.

Adhesive butyl sealing tape for airtight joints on the 4th side of the window.

EPDM flashing and perimeter seal for curtain walls/ventilated façades and windows and doors.

Joint tape BG2 (300 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.

Single-sided adhesive, closed-cell PE sealing tape for the use on the underside of windows and doors. Maintains impermeability to water even in the presence of backwater.

Barriera al vapore interna, a membrane for sealing joints in the professional installation of windows and doors.

Insulating membrane for timber, PVC and aluminium windows and doors, made up of high-performance polymeric tape in water vapour-proof fabric (from the inside to the outside), which can be plastered and painted. The UV-resistant surface is coated with a high-quality acrylic adhesive. Applied on the inside of the primary joint between the wall and the sub-frame or window, it follows the movements of the connected parts thanks to its high elongation capacity.

Multi-functional BG1/BGR pre-compressed, single-sided tape made of soft, fine-pored, permanently elastic polyurethane foam. For standard-compliant waterproofing of defined structural connection joints (windows and doors) and for sealing assembly joints between window and building shell.

Joint tape BG1 (600 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.

Primer formulated as a black pre-treatment for glass surfaces to provide a protective coating against UV radiation.

Low viscosity hybrid adhesive for bonding natural and synthetic teak decks. Suitable for large surfaces.

A high-performance structural adhesive and hybrid sealant for all types of applications in the marine industry specifically formulated for bonding and sealing mineral and organic glass.

Primer for sealants on wooden and porous substrates.

Neutral, sandable silicone sealant for teak caulking.

Hybrid polymer-based adhesive-sealant with extended open time for natural and synthetic teak.

Hybrid polymer-based, sandable sealant for teak caulking.

Fast hardening adhesive-sealant based on hybrid polymers with high initial adhesion.

Neutral silicone sealant with anti-mould agent and low modulus of elasticity.

Transparent, neutral-curing silicone sealant for corner joints and glass.

Super strong, hybrid polymer adhesive with high initial tack for indoor and outdoor applications. No need of external mechanical fixture during hardening.

Neutral silicone sealant with high fire resistance.

Pneumatic gun for extruding sealants and adhesives in standard plastic and aluminium cartridges or aluminium bags.

PVC trowel with rubber handle, for applying acrylic, siloxane coatings for thermal insulation systems. Dimensions 280 x 130 x 2,5 mm.

Steel trowel with semicircular toothing 12 x 20 mm, with wooden handle, for applying coatings and adhesives for thermal insulation systems. Dimensions 480 x 130 x 0.6 mm.

Steel trowel with semi-circular toothing 16 x 20 mm, with wooden handle, for applying coatings and adhesives for thermal insulation systems. Dimensions 480 x 130 x 0.6 mm.