® Hydro Light>Mastofix® Hydro Light
Hydrophobised skimming adhesive in powder form based on cement, selected mineral aggregates, EPS spheres, additives. For bonding and skimming EPS insulation boards, MW rock wool, and PIR foamed polyiso foam.
Construction
Products for concrete reconstruction, sealants, thermal insulation compound systems and much more are just some of the products that the company is constantly developing and improving, because Torggler has been offering the best solutions for the construction industry for more than 155 years.
Panel Pro
Self-extinguishing PU adhesive for bonding insulation panels.
Mirror
Neutral silicone adhesive for bonding and installing mirrors.
Pneumatic gun CSGII 370
Pneumatic gun for extruding sealants and adhesives in standard plastic and aluminium cartridges or aluminium bags.
Flex PU Catalyser
Accelerating additive used with Flex PU liquid polyurethane waterproofing membrane.
Umafix HP
Fast-setting, high-strength, premixed cementitious mortar of class R3 and type CC according to EN 1504-3.
Wash
Matt low-emission vinyl resin paint for interior wall surfaces, washable, very high coverage and filling, ideal for masking imperfections in the substrate.
Flex PU
Liquid polyurethane membrane with high permanent elasticity, used for long-lasting waterproofing based on pure hydrophobic elastomeric polyurethane resins, which provide excellent mechanical, chemical, thermal, UV and natural resistance.
life Ceiling>Panel life Ceiling
Calcium silicate panel for insulation of thermal bridges in the ceilings in the Wall Remedy System.
life Window>Panel life Window
Calcium silicate panel for internal insulation of window relief patterns in the Wall Remedy System.
Flex PU Primer 2K
Water-based, rigid and transparent epoxy primer. Used as a primer in waterproofing, sealing and floor coating applications on non-absorbent surfaces.
Flex PU Detail
Liquid, permanently elastic, thixotropic, fibre-reinforced polyurethane membrane for complex spots and details.
Flex PU Drive
Polyurethane, pigmented, abrasion-resistant, semi-rigid, colour-stable and UV-resistant coating used as finishing for the protection of exposed waterproofing coatings subject to high abrasion conditions, particularly suitable for public areas and driveways.
Flex PU Walk
Polyurethane, pigmented, UV-resistant, colour-stable coating with high permanent elasticity, used as a top coat for protecting exposed polyurethane waterproofing coatings. Particularly suitable for pedestrian areas.
Geotex
Non-woven polyester geotextile (60 g/m2) used as reinforcement in conjunction with Flex PU liquid waterproofing membranes.
Varitherm
Sintered expanded polystyrene panel with graphite additive with excellent mechanical compactness, high thermal insulation and a high density of 140 kg/m³ for use as an insulating underlay, thermal bridge correction, underlay for windows and as a direct, through or press-fit block.
®>Mastofix®
Adhesive and levelling compound based on cementitious, selected mineral aggregates, additives. Grain size approx. 1 mm. For bonding and smoothing in ETICS systems of EPS, MW and PIR insulation panels.
Mineral Skin
White, hydrophobised, mineral coating for interior walls as well as for facades on priming plaster and insulation panels.
Breathe
Vinyl resin-based paint for interior wall surfaces, highly breathable ideal for areas exposed to condensation such as bathrooms and kitchens.
Clean
Vinyl resin-based paint for interior wall surfaces, highly breathable and anti-mould function, ideal for renovating mould-prone rooms such as laundries, bathrooms and kitchens.
Steinopor EPS-F Plus
Expanded polystyrene panel with graphite/other carbon derivatives additive, cut from block, with straight edge for thermal insulation of vertical external walls.
Flex PU Primer
A solvent-based, transparent, rigid, deep-penetrating, fast-drying polyurethane primer.
® Infinity>Sitol® Infinity
Fast curing hybrid adhesive and sealant suitable for wet surfaces.
Rete SSA
160 g alkali-resistant reinforcement mesh for ETICS systems, reinforced skim coats and for Wall Remedy System.
Coppi Merano
High-performance PU foam with extended open time and maximum adhesion for roof tiles.
Hybrid HM
Single-component, hybrid polymer-based adhesive-sealant with anti mould agent for overpaintable elastic bonding and sealing of joints in construction and industry in general.
Domus
Neutral curing silicone sealant with anti-mould agent and low modulus of elasticity.
® Light>Mastofix® Light
Adhesive and levelling compound based on cementitious, selected mineral aggregates, EPS fibres, additives. For bonding and smoothing of EPS, MW, and PIR-coated polyiso foam insulation panels.
Volt
Glow wire resistant polyurethane foam for electrical installations.
Marble & Stone
Neutral curing silicone sealant with low modulus of elasticity for marble and natural stone.
Fixing pins
For window reveal elements Lai-Sys.
Tack PU
Single-component, fast-setting polyurethane adhesive with maximum strength for joining corners with brackets on aluminium systems. Also suitable for applications in the marine industry.
Window reveal element Lai-Sys
Window reveal element Lai-Sys made of expanded polystyrene (EPS) for accommodating window and door reveals in thermal insultation systems.
Window lintel element Lai-Sys
Window lintel element Lai-Sys made of expanded polystyrene (EPS) for accommodating window and door reveals in thermal insultation systems.
Connector profile type U-AL
Connector profile type U-AL for window reveal elements Lai-Sys.
Connector profile type U
Connector profile type U for window reveal elements Lai-Sys.
Chemical Anchor Cage
Cage for application of chemical anchors on perforated bricks in combination with threaded rods of different size. Hole diameter 12 mm and hole length 80 mm; hole diameter 15 mm and hole length 85 mm; hole diameter 20 mm and hole length 85 mm.
Skin Acryl
Acrylic protective coating with compacted skim effect.
Finish Siloxan
Smooth siloxane paint with lotus effect.
Skin Siloxan
1.0 / 1.2 / 1.5 mm siloxane-fibre-reinforced coating with a skimmed appearance.
Finish Acryl
Quartz-based acrylic paint for exterior wall surfaces with high filling power. Water-repellent, contains special anti-algae and anti-mould protective film.
TRA WIK PU
Mounting bracket made of rigid, rot-proof polyurethane foam, with three foam washers. The 20 mm grid on both sides marks the precise cut of the saw, allowing the desired thickness to be used, from 60 to 200 mm. Recommended for hinges and parapets. (incl. 3 screw anchors SXRL).
Skin Acriloxan
Fibre-reinforced acryl-siloxane coating with compacted skim coat effect.
Consolida
Highly penetrating water-based levelling and consolidating fixative.
Primer VIP
Universal pigmented primer with high filling and masking power, suitable for application of paste coatings on plasters, reinforced skim coats and eTics systems.
Finish Acriloxan
Highly filling quartz-based acryloyloxane paint.
Flex 365
Flexible polyurethane foam for the assembly of wooden, PVC or aluminium window frames and shutters, up to -10 °C.
Restauro Pittura
Smooth anti-carbonation paint specifically for concrete.
Tile Epoxy Cleaner
Special cleaner for epoxy grouts.
Flexistar Rapid
Single component, flexible, fibre-reinforced, cementitious, polymer waterproofing membrane with fast hardening.
® Rapid>Aquatech® Rapid
Elastic, single-component, quick-hardening liquid waterproofing membrane in water emulsion for exterior and interior waterproofing.
A 2.1
Multipurpose paintable acrylic sealant.
Milling tool plate
Disc to match the depth milling bits for fitting VARIZ 90 mounting cylinder.
Trowel for rustication mesh
Special tool for the application of the rustication mesh, consisting of 4 pieces, a stainless steel trowel and three interchangeable plastic profiles Typ 1, Typ 2 and Typ 3.
Milling tool rod
Element to be combined with the Ø 90 mm disc for fitting the VARIZ 90 mounting cylinder.
Rustication mesh for external corners
Three-dimensional reinforcement mesh for external corners in the grooves of eTics systems.
Black Hydro Pittura
Solvent-based protective and decorative paint, based on bitumen, aluminium paste, selected synthetic resins and special additives.
Plaster stop profile
End profile with mesh for perfect closure of façade coatings. It can be used on ETICS or reinforced skim coats up to 3 or 6 mm.
Movement joint profile horizontal Profi PU
Horizontal expansion profile with integrated PE sealing tape to ensure a watertight seal, small movements and compressive stress of the joint located in the transition zone between two structures, e.g. between a solid and a lightweight construction.
Sheet metal connection profile
Connecting profile for flashings, adjustable, it guarantees a watertight seal and perfect aesthetics thanks to the hidden drip ledge.
Standard window connection profile
PVC adhesive profile with fibreglass mesh for connecting windows, doors and similar elements.
PVC mesh corner bead
PVC corner protection profile with fibreglass mesh for thermal insulation systems.
Rustication mesh
Rusticated mesh for longitudinal reinforcement in the grooves of eTics systems.
Reveal corner angle for windows
Preformed three-dimensional reinforcement mesh for reinforcing the inside corners of window and door soffits on ETICS systems.
Movement joint profile
Vertical expansion profile with protective tape and flexible band to ensure the aesthetic safety on façades of possible minor stresses on non-structural construction elements.
Drip edge profile
PVC corner profile with fibreglass mesh for making drip ledges on balconies, ledges, window lintels, horizontal edges.
Expansion joint profile V-shape
Profile for making angular expansion joints in façades in ETICS systems.
Expansion joint profile E-shape
Profile for linear expansion joints in façades in ETICS systems.
PVC baseboard profile
PVC insertion profile in combination with starter profiles L55, L100, L160, hermetically seals and completes the starting point of ETICS systems, with hidden drip ledge.
Corner bead roll
Corner roll profile for variable angle creation with fibreglass mesh for thermal insulation systems.
Clip on profile
Connection profile for aluminium starter profile, with hidden drip ledge.
PVC basic baseboard profile
PVC starter profile, L-shaped, for thermal insulation system with thickness up to 240 mm in combination with the insertion profile.
Window connection profile 3D-PRO
Heavy-duty rainproof profile for plaster connections to windows, doors and similar construction elements with stress-relieving function in three 3D dimensions, protective lip and expanding seal.
Panel F
Single-component, quick-hardening polyurethane adhesive for bonding plasterboard and insulation panels.
R-TFIX-8S
Screw-in insulation anchor with high performance on all types of material, recommended for ETICS.
Washer MW60
Hole cover disc made of mineral wool for Termoz CS II and Termow 6H screw-in anchors. Suitable for MW panels.
Washer PS60
Grey EPS cover plate for Termoz CS II and Termoz 6H screw-in anchors. Suitable for EPS and PIR panels.
eTics Screw-in dowel installation kit
Installation kit for fastening Termoz CS II and Termoz 6H screw-in anchors.
eTics Twister installation tool
Adjustable mounting tool depending on the insulating panel thickness from 100 mm to 260 mm.
Masonry drill bit SDS Plus II
Drill bit for installing insulation anchors.
Termoz CS II
Screw-in anchor for all types of insulation panels.
Termoz 6H
Screw-in anchor for installation on wooden structures, wooden panels, OSB, chipboards, MDF or gypsum fibre.
Termoz CN 8
Percussion driven anchor with composite pin for all types of insulation panels.
eTics Twister
Universal screw anchor for EPS, MW, PIR and PF insulation panels.
Black Hydro Poly 2K
Bicomponent, polymer-modified, bituminous thick coating.
Black Hydro Poly 1K
Single component, polymer-modified bituminous thick coating.
Sitol A
Bituminous, waterproofing and anti-corrosion paint.
Joint smoother set rounded
Spatulas with 2 roundings each, for professional smoothing of silicone, hybrid, polyurethane and acrylic sealants.
Joint smoother set angle
Kit of spatulas for the surface smoothing (45°) of connection and expansion joints made of silicone, acrylic, hybrid or polyurethane sealants.
Varir 120×160
Expansion moulded mounting block in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.
Variz 90
Expansion moulded mounting cylinder in EPS, with a high specific weight of 140 kg/m³ for thermal bridge suppression when securing light loads.
K1-PE
Hinge mounting element.
Nozzle for foil bags
Nozzle for sealants in foilbags.
R.E.D.
Pre-mixed fibre-reinforced mortar/plaster for regularisation, levelling and restoration work from 3 to 40 mm. Skim plaster for façade renovation with very high adhesion power and excellent workability, type GP CSII W0, according to EN 998-1, for restoration and levelling work, for thickness from 3 to 40 mm. For manual and machine applications.
Restauro R4
Premixed, single-component, anti-shrinkage, normal setting, pre-mixed mortar for concrete and reinforced concrete reconstruction and protection, PCC type and class R4 according to EN 1504-3.
Restauro R3
Premixed, single-component, anti-shrinkage, semi-rapid, pre-mixed mortar for concrete and reinforced concrete reconstruction and protection, PCC type and class R3 according to EN 1504-3.
Restauro Finitura
Premixed, single-component, resin-bonded, fibre-reinforced, class C MC IR fine mortar according to EN 1504-2 for smoothing and protecting concrete elements.
Restauro Ferri
Single-component mortar for protective anticorrosive and CO2 barrier treatment of rebars. It meets the minimum requirements of EN 1504-7.
Hybrid LM
Low modulus of elasticity sealant, based on hybrid polymers, for façades and windows.
PVC chopping board with rubber handle 280×130
PVC trowel with rubber handle, for applying acrylic, siloxane coatings for thermal insulation systems. Dimensions 280 x 130 x 2,5 mm.
Notched trowel with wooden handle T16 480×130
Steel trowel with semi-circular toothing 16 x 20 mm, with wooden handle, for applying coatings and adhesives for thermal insulation systems.
Dimensions 480 x 130 x 0.6 mm.
Notched trowel with wooden handle T12 480×130
Steel trowel with semicircular toothing 12 x 20 mm, with wooden handle, for applying coatings and adhesives for thermal insulation systems.
Dimensions 480 x 130 x 0.6 mm.
Tile Grout 5-15 mm
Cement-based powder grout, classified as CG2 to UNI EN 13888, for filling joints 5 to 15 mm wide.
UMP ALU TR
Rectangular plate for securing heavy loads in thermal insulation systems and preventing the formation of thermal bridges.
Electric box E-LINE
Insulated electrical box for securing electrical components in external thermal insulation systems, avoiding the formation of thermal bridges on the insulation.
Self-expanding joint sealing tape EXP
Joint tape BG1 (600 Pa) is self-expanding pre-compressed sealing tape made of polyurethane foam impregnated with acrylic dispersion, for joints in building and construction, windows, metal constructions, timber houses, etc. It guarantee perfect thermal insulation between the window and the wall. If compressed between the two elements, they can be directly exposed to weather. The provide insulation against wind, draughts, noise, dust and rain.
Aluminium base starter profile
Aluminium starter profile to hold the insulation panel at the base of the system.
Ekomix Panel Wool – P
Mineral wool insulation panels with double thickness for thermal insulation, soundproofing and fire protection, especially for thermal insulation composite systems. Manufactured in accordance with the required environmental criteria.
Acetic Fast
Silicone sealant with acetic curing, transparent, very fast hardening.
Umafix
Premixed cement mortar, thixotropic, fast-setting and hardening and with high mechanical strength for various type of reparation.
Synthetic Plugging Cord
Closed-cell polythene plugging cord of variable thickness for preparation ofexpansion joints.
Rinzaffo
Rendering coat for renovating and/or dehumidifying plasters.
Umatixo
One-component, pre-mixed thixotropic cement mortar. Fast setting and hardening times fibre-reinforced with high mechanical strength, type CC and class R4 according to EN 1504-3, for fixing manhole covers, localised repair of interior and exterior industrial floors and repair of reinforced concrete.
Umaflow
One-component, pre-mixed, fluid, non-shrinking, fibre-reinforced, fast setting and hardening mortar with high mechanical strength. Type CC and class R4 according to EN 1504-3, for fixing manhole covers, localised repair of interior and exterior industrial floors and repair of reinforced concrete.
Flash
Extra-fast setting, premixed cementitious mortar for small installation works.
Stop
Very fast-setting pre-mixed mortar.
Livellina 0-10
Self-levelling screed for irregular surfaces, up to 10 mm thickness, also for heated floors.
Livellina 5-30
Self-levelling screed for irregular surfaces, from 5 to 30 mm thickness, also for heated floors.
Floorrep
Self-levelling rapid cement mortar for repairing industrial floors with thickness of 3 mm to 30 mm.
Risan One
Pre-mixed cementitious mortar 3-in-1. Multi-functional for the creation of renovation plasters on masonry affected by rising damp and saline efflorescence.
Strutturale
Premixed, high-strength thixotropic mortar, fibre-reinforced, EN 1504-3 CC type and R4 class, for the reconstruction of structural components.
Restauro R2
Premixed fast setting thixotropic mortar, uni en 1504-3 pcc type and r2 class, resin-bonded and fibre-reinforced, for reconstruction of concrete.
Rinnova
Quick-setting, single-component premixed mortar. Thixotropic, non-shrink, fibrereinforced. Type PCC and class R2 as per 1504-3 and type C, MC and IR principles, as per UNI EN 1504-2. For smoothing and repairing concrete.
Low Modulus
Neutral cured silicone sealant.
Coppi
Polyurethane foam with extended open time, reduced post-expansion, and high tear resistance.
Fire Resistant
Polyurethane foam with high resistance to fire.
Multiuso
Multi-purpose polyurethane foam.
Lamiera
Neutral curing silicone sealant specifically for tin roofing works.
Neutral
Transparent, neutral-curing silicone sealant for corner joints and glass.
Polycarbonate
Neutral cured silicone sealant for polycarbonate elements.
Floor
Neutral curig silicone sealant for floor applications.
Acetic Standard
Acetic curing silicone sealant with anti-mould agent for sanitary use and facades.
Acetic Professional
Acetic curing silicone sealant, resistant to moulds for door and window frames and sanitary use.
Acryl 15
High-performance paintable acrylic sealant for elastic sealing of connection joints.
Acryl 10
Paintable acrylic sealant for elastic sealing of connection joints.
Tile Epoxy
Two-component epoxy mortar, class R2 T according to EN 12004 and class RG according to EN 13888, for the bonding and grouting up to 15 mm of ceramic, ceramic and glass mosaic, marble and natural stone elements.
Strong
Super strong, hybrid polymer adhesive with high initial tack. No need of external mechanical fixture during hardening.
Tack
Multi-purpose adhesive based on acrylic resins for internal applications.
Multigrip
Multigrip is a single component, adhesion promoting primer, based on a styrene-acrylic resin water based emulsion and selected aggregates.
Flexistar
Extra-flexible, single-component, fibre-reinforced cementitious polymer sheath for waterproofing and protecting concrete.
Aquaproof
Fine waterproofing mortar.
Flex 1K
Single-component, flexible, fibre-reinforced, waterproofing cementitious mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates.
Flex 2K
Two-component, flexible, fibre-reinforced, waterproofing cementbased mortar, which can be reinforced with fibreglass mesh, for flexible waterproofing and protective smoothing of cementitious substrates. Good UV resistance, elastic to -20 °C.
Asfredol 1000
Cold asphalt, composed of an anionic bituminous emulsion, free of organic solvents, for waterproofing and surface protection of porous surfaces, both wet and dry.
Asfredol 2000
Resin-bonded cold bituminous emulsion ready to use.
Aquatech
Single-component liquid waterproofing sheath in water emulsion.
Primer Aquatech
Aquatech waterproofing liquid sheath primer.
Promural Silicon
Transparent, ready-to-use hydrophobising impregnating agent based on siloxane polymers dissolved in solvent, type H for PI, MC, IR according to EN 1504-2, for the protective treatment of absorbent mineral substrates.
Neoplast Latex
Additive based on special resins, modifying agent for cements and hydraulic limes with gripping adhesive function.
Neoplast Grip
Additive based on special latex, modifying agent for hydraulic cements and limes with gripping adhesive function.
Tile Cleaner
Acid detergent for ceramic tiles.
Refractory
Refractory mastic for grouting in situations exposed to temperatures up to 1000 °C.
Tile Primer
Improved adhesion, absorption and insulation pretreatment for the installation of tiles on gypsum, anhydrite and cementitious substrates.
Quarz
Pre-mixed anti-wear dry-shake finish for industrial floors, class CT-C70-F7-AR1 according to EN 13813 - material for cement-based screeds for use inside buildings.
Fire Resistant
Neutral silicone sealant with high fire resistance.
Emulsione Epossidica 723
Protective, water-based, type C, two-component epoxy resin paint, according to EN 1504-2.
Epoxy
Two-component epoxy protection coating.
Primer Silicone
Pre-spreading for silicone sealants, siloxane resin in solvent-based, for priming the sides of joints subject to high stress and/or where adhesion may be difficult.
Flex
Flexibilizing agent for Aquaproof and cementitious adhesives.
Cleaner for Polyurethane Foams
Spray cleaner for fresh polyurethane foam of any type and sealants.
Epox Ripresa
Two-component epoxy adhesive for concrete casting joints.
Stuccosol
Very fine cement mortar for grouting and smoothing cement elements.
Acrysil PRO
Acrylic-silane sealant for sealing flexible joints.
Acryl Fire Resistant
Acrylic sealant for applications subject to fire regulations up to EI 240.
High Tack
Polyurethane adhesive for waterproof bonding and sealing.
Window & Door
Polyurethane foam for various type of installations.
Colabile
Premixed, high-strength, fibre-reinforced mortar, UNI EN 1504-3 PCC type and R4 class, applicable by casting in formwork for the reconstruction od structural components.
Heat Resistant
Acetic silicone sealant for temperatures up to 300 °C.
Xtreme Grip Vinylester
Two-component vinylester resin-based chemical anchor without styrene for structural fixings on cracked/un-cracked concrete, solid and perforated brick masonry, wood.
CA Poly
Two-component polyester resin-based chemical anchor without styrene for fixing medium-light loads on un-cracked concrete, solid and perforated brick masonry and autoclaved cell concrete.
AC 2.0
Single-component silicone sealant with acetic cross-linking for bonding and elastic sealing of expansion joints with a maximum working elongation of 25%. The hardening takes place by reaction with atmospheric humidity. Mould resistant formulation.
AF 2.0
Single-component acrylic-based elasto-plastic sealant in aqueous dispersion for overpaintable sealing of cracks, fissures and connection joints between façade elements with a maximum working elongation of 7.5%.
AR 2.0
Single-component, elastic, acrylic-based sealant in aqueous dispersion, workable with trowel, for overpaintable sealing of cracks and fissures where a rough material appearance similar in grain to civil finishes is required.
C 2.0
Highly adhesive single-component polyurethane foam for installation of roof tiles or bent tiles. It hardens by reaction with the humidity of the atmosphere and of the substrates. It guarantees quick, easy and clean installation operations.
HY 2.0
Single-component adhesive-sealant based on hybrid polymers, with mould resistant formulation, for overpaintable elastic bonding and sealing of connection joints, for general construction and industry applications. It cures by reaction with atmospheric humidity.
M 2.0
Single-component multifunctional polyurethane foam for thermo-insulating filling and bonding in building, industrial and plant engineering sectors. It guarantees quick and clean installation operations. It adheres to most porous and non-porous substrates.
F 2.0
Elastic one-component polyurethane foam for the assembly of window frames in wood, pvc or aluminium. It guarantees rapidity and cleaning during installation. Adheres to most porous and non-porous supports.
T 50
Cementitious adhesive for laying absorbent ceramic tiles, indoors and outdoors. Suitable for single-fired and double-fired ceramic materials and aerated concrete materials. It can also be used as thin-layer masonry mortar.
T 480
A deformable cement adhesive for all sizes of porcelain stoneware tiles and glazed tiles. Even for overlap. For indoor and outdoor use also on substrates subject to movement.
Black Hydro Easy
Multipurpose, thixotropic, bituminous liquid waterproofer made up of inert fillers, elastomeric resins and additives. Suitable for waterproofing earth retaining foundation walls. Used as sealant and finisher for roof waterproofing and insulation panel bonding applications.
Black Hydro Light
Elastomeric bituminous waterproofer lightened with rubber granules for waterproofing horizontal and vertical concrete and brick surfaces.
Smooth
Neutral smoothing agent based on amphoteric surfactants in aqueous solution, for professional surface finishing of connection joints and expansion joints made with silicone, acrylic and hybrid sealants.
Tile 2020
Highly deformable, quick-setting, lightened cementitious adhesive for tiles, porcelain stoneware, stones and large marble.
T 250
Single-component powder cementitious tile adhesive, type C2 TE according to EN 12004, flexible, non-slip and with extended open time, for bonding all types of ceramic tiles of medium/small size, both indoors and outdoors, to walls and floors.
Livellina HS
Self-levelling, quick hardening, cementitious screed with very low emissions particularly suitable for underfloor heating and for the equalisation of substrates with thickness from 5 to 40 mm.
Multimix Evo
Quick-setting pre-mixed and fibre-reinforced mortar for restoration, renovation and levelling work both on façades and floors in thickness from 3 to 50 mm. Good adhesion and excellent workability. For manual and machine applications.
Bond & Finish
Pre-mixed mineral mortar to be used to lay calcium-silicate panels, both as an adhesive for bonding to the support, and for the finishing and smoothing of fiberglass reinforcing mesh.
life>Panel life
Calcium silicate panel for interior applications, to resolve the problems of surface condensation, mould and harmful salts.
Bitumen Seal
Ready-to-use, single-component elasto-plastic adhesive-sealant, based on bituminous polymers in solvent, specific for bonding and sealing various types of substrates, even the wet ones.
Shield
Hydrophobic pre-treatment for calcium silicate-based panels or porous and/or absorbent surfaces.
Deep Cleaner
Biocide for sanitizing surfaces with mould and microbiological growths.
Hydro
Specific one-component polyurethane adhesive for waterproof sealing of hydraulic elements.
Ekomix Plus
Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and smoothing mineral wool insulation panels. Component of the Ekomix Wool system.
Ekomix
Powder finishing mortar and adhesive made of cement, selected mineral aggregates, additives. For bonding and rendering polystyrene insulation panels. Component of the Ekomix EPS system.
Black Hydro Spray
Solvent-based bituminous waterproofing protective sealant in spray can, suitable on any type of substrate.
GP 100
Ready-to-use paste putty for indoor use.
DP 501
Premixed cementitious mortar for dehumidifying plasters.
BW 200
Multi-function bituminous waterproofer.
BW 100
Bituminous liquid waterproofer.
Espansol Ancor
Pre-mixed, fluid, self-levelling cementitious mortar for anchoring and precise grouting works.
Safe Tape 40 mm – 10 m
Cut-resistant tape.
BU Tape
Butyl reinforcement tape.
Shower Tape
Self-adhesive shower/bathtub connection tape.
Flex Pipe Collar 93 – 146
Collar for through-hose with flexible reinforcement.
Flex Pipe Collar 50 – 75
Collar for through-hose with flexible reinforcement.
Flex Pipe Collar 22 – 37
Collar for through-hose with flexible reinforcement.
Floor Collar
Self-adhesive butyl collar for floor drains.
Mat 1000 mm – 30 m
Waterproof membrane.
Band 140 mm
Waterproof membrane in tape format.
Corner Tissue 270°
Reinforcement tissue for open corners.
Corner Tissue 90°
Reinforcement tissue for closed corners.
Bridge Mat 1000 mm – 50 m
Desolarizing waterproof membrane.
Chemical Anchor Mixer
Mixer for chemical anchors.
Ekomix Panel EPS White
White sintered expanded polystyrene panel, cut by block, straight edge for the thermal insulation of vertical walls with coat.
Ekomix Panel EPS Grey
Sintered expanded polystyrene panel with graphite additive, cut from block, straight edge for the thermal insulation of vertical walls with coat.
Ekomix Panel Base
Sintered polystyrene foam panel with external film transparent to resist water absorption printed on straight edge for the creation of the starting skirting in coat systems.
PP Tape 120 mm – 50 m
Polypropylene reinforcement tape with side perforations
Intonaco WTA
Premixed plastering mortar for the renovation of masonry subject to rising capillary damp, according to EN 998-1 type R, WTA certified.
Finitura
Breathable, fine-grain premixed mortar for the finishing of renovating and/or dehumidifying plasters.
Finissimo
Very fine, water-repellent, breathable, premixed mortar to give a smooth finish to traditional indoor and outdoor renovation and/or dehumidifying plasters.
Tile 900
One-component cementitious adhesive, type C2 E according to EN 12004, flexible and waterproof, for laying all types of ceramic tiles, including large tiles, for walls, floors and paving. Ideal indoors for waterproof applications in bathrooms and kitchens but also outdoors and on all kinds of substrates. Frost resistant.
Tile 700
Improved one-component cementitious adhesive type C2 E S1 according to EN 12004, quick setting and hardening, highly flexible and high strength, for gluing wall, floor and paving slabs or blocks of marble or natural stone and ceramic tiles of all kinds. Can be used indoors and outdoors. Frost resistant.
Tile Grout 2-15 mm
Cement based powder grout, single component, fl exible and waterproof, classifi ed as CG2 WA in compliance with EN 13888, for fi lling joints 2 to 15 mm wide.
Fast Screed
Pre-mixed, fast setting and hardening cementitious mortar class CT C30 F6 according to EN 13813, for floating or adherent screeds. For internal and external use.
Antisale
Universal keying agent for protection against saline efflorescence.
Tile Grout ≤8 mm
Cement-based powder grout, classified as CG2 WA in compliance with EN 13888, for rigid filling of joints up to 8 mm.
Tile 600
Single-component, adhesive cement powder, type C2 FE to EN 12004, quick setting and hardening, flexible and high strength, for gluing over old tiles or surfaces. For indoor and outdoor applications. For ceramic wall and floor tiles of all types. Frost resistant.
Tile 350
Improved, single-component, cementitious tile adhesive, type C2 TE according to EN 12004. Anti-slip, flexible, high resistance. Can be used indoors and outdoors, for walls and floors, even over old tiles. Suitable for porcelain and glazed stoneware and all ceramic tiles. Frost resistant.
Tile 480
One-component, improved, high strength, cementitious adhesive, with long open time, deformable, class C2 TE S1 in compliance with EN 12004. For indoor and outdoor use on walls and floors, even for overlaying, for porcelain and glazed stoneware and ceramic tiles of all types and sizes. Frost resistant.
Tile 250
Improved, single-component, cementitious tile adhesive, type C2 TE according to EN 12004, antislip and flexible, for gluing porcelain or glazed tiles of medium size. Can be used indoors and outdoors, on walls and floors. Frost resistant.
Multifinish
Fibre-reinforced, thixotropic, cementitious mineral mortar for repairing and finishing various types of surfaces, up to 10 mm thickness.
